1 Features

• AEC-Q100 qualified with the following results:

– Device temperature grade 1: –40°C to +125°C

ambient operating temperature TA

– Device HBM ESD classification level 2

– Device CDM ESD classification level C7B

• Functional Safety-Capable

– Documentation available to aid functional safety

system design

• Wide supply voltage range: 2.7V to 65V

• SENSE and RESET pins are 65V graded

• Low quiescent current: 1μA (typical)

• Flexible and wide voltage threshold options

– 2.7V to 36V (1.5% maximum accuracy)

– 800mV option (1% maximum accuracy)

• Built-in hysteresis (VHYS)

– Percentage options: 2% to 13% (1% steps)

– Fixed options: VTH < 8V = 0.5V, 1V, 1.5V,

2V, 2.5V

• Programmable reset time delay

– 10nF = 12.8ms, 10μF = 12.8s

• Programmable sense time delay

– 10nF = 1.28ms, 10μF = 1.28s

• Manual Reset (MR) feature

• Output reset latching feature

• Output topology: Open-Drain or Push-Pull

2 Applications

• Telematics control unit

• Audio amplifier

• Head unit and cluster

• Body control module

3 Description

The TPS3760-Q1 is a 65V input voltage detector with

1μA IDD and 1% accuracy, and a fast detection time.

This device can be connected directly to 12V / 24V

automotive battery system for continuous monitoring

of over (OV) or under (UV) voltage conditions; with

the internal resistor divider, it offers the smallest total

solution size. Wide hysteresis voltage options are

available to ignore cold crank, start-stop and various

car battery voltage transients. Built-in hysteresis on

the SENSE pin prevents false reset signals when

monitoring a supply voltage rail.

The separate VDD and SENSE pins allow

redundancy sought by high-reliability automotive

systems and SENSE can monitor higher and lower

voltages than VDD. Optional use of external resistors

are supported by the high impedance input of

the SENSE pin. CTS and CTR pins allow delay

adjustability on the rising and falling edges of the

RESET signals. Also, CTS functions as a debouncer

by ignoring voltage glitches on the monitored voltage

rails; CTR operates as a manual reset (MR) that can

be used to force a system reset.

The TPS3760-Q1 is available in a 4.1mm×1.9mm

SOT 14-pin package. TPS3760-Q1 operates over –

40°C to +125°C TA.