1 Features

1• 2.5 V to 5.5 V Input Voltage Range

• DCS-Control™

• Up to 95% Efficiency

• Power Save Mode

• 20 μA Operating Quiescent Current

• 100% Duty Cycle for Lowest Dropout

• 1.4 MHz Typical Switching Frequency

• 0.8 V to VIN Adjustable Output Voltage

• Output Discharge Function

• Adjustable Soft Startup

• Hiccup Short Circuit Protection

• Output Voltage Tracking

• Pin-to-Pin Compatible with TLV62090 and

TPS62095

• For Improved Feature Set, See TPS62095

• Create a Custom Design Using the TLV62095

With the WEBENCH® Power Designer

2 Applications

• TV, STB, Computers

• Solid State Drives (SSD)

• Hard Disk Drives (HDD)

• Battery Powered Applications

3 Description

The TLV62095 device is a high frequency

synchronous step-down converter optimized for small

solution size, high efficiency and suitable for battery

powered applications. To maximize efficiency, the

converter operates in PWM mode with a nominal

switching frequency of 1.4MHz and it automatically

enters Power Save Mode operation at light load

currents. When used in distributed power supplies

and point of load regulation, the device allows voltage

tracking to other voltage rails and tolerates output

capacitors ranging from 10 μF to 150 μF and beyond.

Using the DCS-Control™ topology, the device

achieves excellent load transient performance and

accurate output voltage regulation.

The output voltage start-up ramp is controlled by the

soft startup pin, which allows operation as either a

standalone power supply or in tracking configurations.

Power sequencing is also possible by configuring the

EN and PG pins. In Power Save Mode, the device

operates with typically 20-μA quiescent current.

Power Save Mode is entered automatically and

seamlessly maintaining high efficiency over the entire

load current range.

The device is available in a 3 mm x 3 mm 16-pin

VQFN package.