Controlled Baseline

− One Assembly

− One Test Site

− One Fabrication Site

Extended Temperature Performance of

−55°C to 125°C

Enhanced Diminishing Manufacturing

Sources (DMS) Support

Enhanced Product-Change Notification

Qualification Pedigree†

Four 12-Bit Digital-to-Analog Converters

(DACs)

Programmable Settling Time of Either 3 μs

or 9 μs (Typ)

TMS320
DSP Family, (Q)SPI. and

Microwire Compatible Serial Interface

Internal Power-On Reset

Low Power Consumption:

8 mW, Slow Mode − 5-V Supply

3.6 mW, Slow Mode − 3-V Supply

Reference Input Buffer

Voltage Output Range . . . 2× the Reference

Input Voltage

Monotonic Overtemperature

Dual 2.7-V to 5.5-V Supply (Separate Digital

and Analog Supplies)

Hardware Power Down (10 nA)

Software Power Down (10 nA)

Simultaneous Update

applications

Battery-Powered Test Instruments

Digital Offset and Gain Adjustment

Industrial Process Controls

Machine and Motion Control Devices

Communications

Arbitrary Waveform Generation

description

The TLV5614 is a quadruple 12-bit voltage output

digital-to-analog converter (DAC) with a flexible

four-wire serial interface. The four-wire serial

interface allows glueless interface to TMS320

DSP family, SPI, QSPI, and Microwire serial

ports. The TLV5614 is programmed with a 16-bit

serial word comprised of a DAC address,

individual DAC control bits, and a 12-bit DAC

value. The device has provision for two supplies

– one digital supply for the serial interface (via pins

DVDD and DGND), and one for the DACs,

reference buffers, and output buffers (via pins AVDD and AGND). Each supply is independent of the other and

can be any value between 2.7 V and 5.5 V. The dual supplies allow a typical application where the DAC is

controlled via a microprocessor operating on a 3-V supply (also used on pins DVDD and DGND), with the DACs

operating on a 5-V supply. The digital and analog supplies can be tied together.