Maximum Throughput . . . 140/200 KSPS

Built-In Conversion Clock

INL/DNL: ±1 LSB Max, SINAD: 72 dB,

SFDR: 85 dB, fi = 20 kHz

SPI/DSP-Compatible Serial Interface

Single Supply: 2.7 Vdc to 5.5 Vdc

Rail-to-Rail Analog Input With 500 kHz BW

Three Options Available:

− TLV2541: Single Channel Input

− TLV2542: Dual Channels With

Autosweep

− TLV2545: Single Channel With

Pseudo-Differential Input

Low Power With Autopower Down

− Operating Current: 1 mA at 2.7 V, 1.5 mA

at 5 V

Autopower Down: 2 μA at 2.7 V, 5 μA

at 5 V

Small 8-Pin MSOP and SOIC Packages

description

The TLV2541, TLV2542, and TLV2545 are a family of high performance, 12-bit, low power, miniature, CMOS

analog-to-digital converters (ADC). The TLV254x family operates from a single 2.7-V to 5.5-V supply. Devices

are available with single, dual, or single pseudo-differential inputs. Each device has a chip select (CS), serial

clock (SCLK), and serial data output (SDO) that provides a direct 3-wire interface to the serial port of most

popular host microprocessors (SPI interface). When interfaced with a TMS320 DSP, a frame sync signal (FS)

can be used to indicate the start of a serial data frame on CS for all devices or FS for the TLV2541.

TLV2541, TLV2542, and TLV2545 are designed to operate with very low power consumption. The power saving

feature is further enhanced with an autopower-down mode. This product family features a high-speed serial link

to modern host processors with SCLK up to 20 MHz. The maximum SCLK frequency is dependent upon the

mode of operation (see Table 1). The TLV254x family uses the built-in oscillator as the conversion clock,

providing a 3.5-μs conversion time.