1 Features

. Input offset voltage: ±40 μV (maximum)

. Input offset voltage drift: 0.35 μV/°C (maximum)

. Low supply current: 950 μA at ±18 V

. Low input bias current: 2 nA (maximum)

. Low input bias current drift: 15 pA/°C (maximum)

. Gain-bandwidth product: 9.2 MHz

. Differential output slew rate: 15 V/μs

. Low input voltage noise: 3.7 nV/√ Hz at 1 kHz

. Low THD + N: .120 dB at 10 kHz

. Wide input and output common-mode range

. Wide single-supply operating range: 3 V to 36 V

. Low supply current power-down feature: < 20 μA

. Overload power limit

. Current limit

. Package: 8-pin VSSOP, 8-pin SOIC

. Temperature range: .40°C to +125°C

2 Applications

. Data acquisition (DAQ)

. Analog input module

. Substation automation

. Semiconductor test

. Lab and field instrumentation

3 Description

The THP210 is an ultra-low-offset, low-noise, highvoltage,

precision, fully differential amplifier that easily

filters and drives fully differential signal chains. The

THP210 is also used to convert single-ended sources

to differential outputs as required by high-resolution

analog-to-digital converters (ADCs). Designed for

exceptional offset, low noise and THD, the bipolar

super-beta inputs yield a very-low noise figure at

very-low quiescent current and input bias current.

This device is designed for signal conditioning circuits

where low power offset and power consumption are

required, along with excellent signal-to-noise ratio

(SNR).

The THP210 features high-voltage supply capability,

allowing for supply voltages up to ±18 V. This

capability allows high-voltage differential signal chains

to benefit from the improved headroom and dynamic

range without adding separate amplifiers for each

polarity of the differential signal. Very-low voltage and

current noise enables the THP210 for use in highgain

configurations with minimal impact to the signal

fidelity.