1 Features

• AEC-Q100 Qualified for automotive applications

– Human body model (HBM) ESD protection:

±12KV for CANH and CANL pins as per

AEC Q100-002

– Charged-device model (CDM) ESD protection:

±500V as per AEC Q100-011

– IEC 61000-4-2 Contact discharge: ±8KV

(unpowered)

• Compatible with ISO 11898-2:2024 physical layer

standard

• Functional Safety-Capable

– Documentation available to aid in functional

safety system design

• Support of classical CAN and optimized CAN FD

performance at 2 and 5Mbps

– Short and symmetrical propagation delays for

enhanced timing margin

• TCAN844V-Q1 I/O voltage range supports 2.9V to

5.25V

• Support for 12V battery applications

• Receiver common mode input voltage: ±12V

• Protection features:

– Bus fault protection: ±40V

– Undervoltage protection

– TXD-dominant time-out (DTO)

• Data rates down to 9.2kbps

– Thermal-shutdown protection (TSD)

• Operating modes:

– Normal mode

– Low power standby mode supporting remote

wake-up request

• Optimized behavior when unpowered

– Bus and logic pins are high impedance (no load

to operating bus or application)

– Hot-plug capable: power up/down glitch-free

operation on bus and RXD output

• 8-Pin SOIC, small footprint SOT-23 and leadless

VSON-8 package with improved automated optical

inspection (AOI) capability

2 Applications

• Automotive and transportation

– Body control modules

– Automotive gateway

– Advanced driver assistance system (ADAS)

– Infotainment

3 Description

The TCAN844-Q1 is a high speed controller area

network (CAN) transceiver that is compatible with

physical layer requirements of the ISO 11898-2:2024

high-speed CAN specification.

The device includes internal logic level translation via

the VIO pin to allow for interfacing the transceiver I/O

directly to 3.3V, or 5V logic levels. The transceiver

supports a low-power standby mode and wake over

CAN which is compatible to the ISO 11898-2:2024

defined wake-up pattern (WUP).

The transceivers also include thermal-shutdown

(TSD), TXD-dominant time-out (DTO), supply

undervoltage detection, and ±40V bus fault protection.

The devices have defined fail-safe behavior in

supply undervoltage or floating pin scenarios. These

transceivers are not only available in industrystandard

SOIC-8 and VSON-8 packages, but also

have a space-saving small footprint SOT-23 package

option.