1 Features

1• Total Power Output (Bridge Tied Load)

– 2 × 100 W at 10% THD+N Into 4 Ω

– 2 × 80 W at 10% THD+N Into 6 Ω

– 2 × 65 W at 10% THD+N Into 8 Ω

• Total Power Output (Single Ended)

– 4 × 40 W at 10% THD+N Into 3 Ω

– 4 × 30 W at 10% THD+N Into 4 Ω

• Total Power Output (Parallel Mode)

– 1 × 200 W at 10% THD+N Into 2 Ω

– 1 × 160 W at 10% THD+N Into 3 Ω

• >110 dB SNR (A-Weighted With TAS5518

Modulator)

• <0.1% THD+N (1 W, 1 kHz)

• Supports PWM Frame Rates of 192 kHz to

432 kHz

• Resistor-Programmable Current Limit

• Integrated Self-Protection Circuitry, Including:

– Under Voltage Protection

– Overtemperature Warning and Error

– Overload Protection

– Short-Circuit Protection

– PWM Activity Detector

• Standalone Protection Recovery

• Power-On Reset (POR) to Eliminate System

Power-Supply Sequencing

• High-Efficiency Power Stage (>90%) With 80-mΩ

Output MOSFETs

• Thermally Enhanced Package 44-Pin HTSSOP

(DDV)

• Error Reporting, 3.3-V and 5-V Compliant

• EMI Compliant When Used With Recommended

System Design

2 Applications

• Mini/Micro Audio System

• DVD Receiver

• Home Theater

3 Description

The TAS5342A is a high-performance, integrated

stereo digital amplifier power stage designed to drive

a 4-Ω bridge-tied load (BTL) at up to 100 W per

channel with low-harmonic distortion, low-integrated

noise, and low-idle current.

The TAS5342A has a complete protection system

integrated on-chip, safeguarding the device against a

wide range of fault conditions that could damage the

system. These protection features are short-circuit

protection, over-current protection, under voltage

protection, over temperature protection, and a loss of

PWM signal (PWM activity detector).

A power-on-reset (POR) circuit is used to eliminate

power-supply sequencing that is required for most

power-stage designs.