位置:SN74LVTH162541DGGR.B > SN74LVTH162541DGGR.B详情

SN74LVTH162541DGGR.B中文资料

厂家型号

SN74LVTH162541DGGR.B

文件大小

450.89Kbytes

页面数量

18

功能描述

3.3-V ABT 16-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

数据手册

下载地址一下载地址二到原厂下载

生产厂商

TI2

SN74LVTH162541DGGR.B数据手册规格书PDF详情

FEATURES

· Members of the Texas Instruments Widebus™

Family

· State-of-the-Art Advanced BiCMOS

Technology (ABT) Design for 3.3-V Operation

and Low Static-Power Dissipation

· Output Ports Have Equivalent 22-W Series

Resistors, So No External Resistors Are

Required

· Support Mixed-Mode Signal Operation (5-V

Input and Output Voltages With 3.3-V VCC)

· Support Unregulated Battery Operation Down

to 2.7 V

· Typical VOLP (Output Ground Bounce) <0.8 V

at VCC = 3.3 V, TA = 25°C

· Ioff and Power-Up 3-State Support Hot

Insertion

· Bus Hold on Data Inputs Eliminates the Need

for External Pullup/Pulldown Resistors

· Distributed VCC and GND Pin Configuration

Minimizes High-Speed Switching Noise

· Flow-Through Architecture Optimizes PCB

Layout

· Latch-Up Performance Exceeds 500 mA Per

JESD 17

· ESD Protection Exceeds 2000 V Per

MIL-STD-883, Method 3015; Exceeds 200 V

Using Machine Model (C = 200 pF, R = 0)

· Package Options Include Plastic Shrink

Small-Outline (DL) and Thin Shrink

Small-Outline (DGG) Packages and 380-mil

Fine-Pitch Ceramic Flat (WD) Package Using

25-mil Center-to-Center Spacings

DESCRIPTION/ORDERING INFORMATION

These 16-bit buffers/drivers are designed specifically for low-voltage (3.3-V) VCC operation, but with the

capability to provide a TTL interface to a 5-V system environment.

These devices are noninverting 16-bit buffers composed of two 8-bit sections with separate output-enable

signals. For either 8-bit buffer section, the two output-enable (1OE1 and 1OE2 or 2OE1 and 2OE2) inputs must

be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 8-bit

buffer section are in the high-impedance state.

The outputs, which are designed to source or sink up to 12 mA, include equivalent 22-W series resistors to

reduce overshoot and undershoot.

When VCC is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down.

However, to ensure the high-impedance state above 1.5 V, OE should be tied to VCC through a pullup resistor;

the minimum value of the resistor is determined by the current-sinking capability of the driver.

Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

These devices are fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioff circuitry

disables the outputs, preventing damaging current backflow through the devices when they are powered down.

The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down,

which prevents driver conflict.

The SN54LVTH162541 is characterized for operation over the full military temperature range of –55°C to 125°C.

The SN74LVTH162541 is characterized for operation from –40°C to 85°C.

更新时间:2025-10-21 10:04:00
供应商 型号 品牌 批号 封装 库存 备注 价格
TexasInstruments
18+
ICBUFF/DVRTRI-ST16BIT48S
6800
公司原装现货/欢迎来电咨询!
TI
2018+
26976
代理原装现货/特价热卖!
Texas Instruments
24+
48-SSOP
65200
一级代理/放心采购
TI
25+
SSOP-48
3854
就找我吧!--邀您体验愉快问购元件!
TI
22+
48SSOP
9000
原厂渠道,现货配单
TI(德州仪器)
24+
SSOP48300mil
7350
现货供应,当天可交货!免费送样,原厂技术支持!!!
TI(德州仪器)
24+
SSOP48300mil
1493
原装现货,免费供样,技术支持,原厂对接
Texas Instruments(德州仪器)
24+
48-BSSOP (0.295, 7.50mm Width
690000
代理渠道/支持实单/只做原装
Texas Instruments
25+
48-BSSOP(0.295 7.50mm 宽)
9350
独立分销商 公司只做原装 诚心经营 免费试样正品保证
TI
17+
SSOP-48
10000
原装正品