1FEATURES

• Qualified for Automotive Applications

• Supports 5-V VCC Operation

• Inputs Accept Voltages to 5.5 V

• Low Power Consumption, 15-μA Max ICC

• ±24-mA Output Drive at 3.3 V

• Offers Nine Different Logic Functions in a

Single Package

• Ioff Supports Partial-Power-Down Mode

Operation

• Input Hysteresis Allows for Slow Input

Transition Time and Better Noise Immunity at

Input

DESCRIPTION/ORDERING INFORMATION

The SN74LVC1G99-Q1 is operational from 1.65 V to 5.5 V.

The SN74LVC1G99-Q1 features configurable multiple functions with a 3-state output. The output is disabled

when the output-enable (OE) input is high. When OE is low, the output state is determined by 16 patterns of 4-bit

input. The user can choose logic functions, such as MUX, AND, OR, NAND, NOR, XOR, XNOR, inverter, and

buffer. All inputs can be connected to VCC or GND.

This device functions as an independent inverter, but because of Schmitt action, it has different input threshold

levels for positive-going (VT+) and negative-going (VT–) signals.

To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup

resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs,

preventing damaging current backflow through the device when it is powered down.