5-W Switch Connection Between Two Ports

TTL-Compatible Input Levels

Outputs Are Precharged by Bias Voltage to

Minimize Signal Distortion During Live

Insertion

Schottky Diodes on the I/Os to Clamp

Undershoots up to –2 V

description

The SN74CBTS6800 provides ten bits of

high-speed TTL-compatible bus switching with

Schottky diodes on the I/Os to clamp

undershoots.

The low on-state resistance of the switch allows

bidirectional connections to be made, while

adding near-zero propagation delay. The device

also precharges the B port to a user-selectable

bias voltage (BIASV) to minimize live-insertion

noise.

The SN74CBTS6800 is organized as one 10-bit switch with a single enable (ON) input. When ON is low, the

switch is on, and port A is connected to port B. When ON is high, the switch between port A and port B is open.

When ON is high or VCC is 0 V, B port is precharged to BIASV through the equivalent of a 10-kW resistor.