Designed to Ensure Defined Voltage Levels

on Floating Bus Lines in CMOS Systems

Reduces Undershoot and Overshoot

Caused By Line Reflections

Repetitive Peak Forward

Current . . . IFRM = 100 mA

Inputs Are TTL-Voltage Compatible

Low Power Consumption (Like CMOS)

ESD Protection Exceeds 2000 V Per

MIL-STD-883C, Method 3015; Exceeds

200 V Using Machine Model

(C = 200 pF, R = 0)

Center-Pin VCC and GND Configuration

Minimizes High-Speed Switching Noise

description

This device is designed to terminate bus lines in CMOS systems. The integrated low-impedance diodes clamp

the voltage of undershoots and overshoots caused by line reflections and ensure signal integrity. The device

also contains a bus-hold function that consists of a CMOS-buffer stage with a high-resistance feedback path

between its output and its input. The SN74ACT1071 prevents bus lines from floating without using pullup or

pulldown resistors.

The high-impedance inputs of these internal buffers are connected to the input terminals of the device. The

feedback path on each internal buffer stage keeps a bus line tied to the bus holder at the last valid logic state

generated by an active driver before the bus switches to the high-impedance state.

The SN74ACT1071 is characterized for operation from –40°C to 85°C.