1FEATURES

2· Eight Inputs

– High Input Voltage – up to 34 V

– Selectable Debounce Filters – 0 ms to 3 ms

– Flexible Input Current Limit – 0.2 mA to 5.2

mA

– Field Pins Protected to 15-kV HBM ESD

· Output Drivers for External Status LEDs

· Cascadable in Multiples of Eight Inputs

· SPI-Compatible Interface

· Regulated 5-V Output for External Isolator

· Over-Temperature Indicator

APPLICATIONS

· Sensor Inputs for Industrial Automation and

Process Control

· High Channel Count Digital Input Modules for PC and PLC Systems

· Decentralized I/O Modules

· Motion Control Systems

DESCRIPTION

The SN65HVS882 is an eight channel, digital-input serializer for high-channel density digital input modules in

industrial automation. In combination with galvanic isolators the device completes the interface between the high

voltage signals on the field-side and the low-voltage signals on the controller side. Input signals are

current-limited and then validated by internal debounce filters.

With the addition of a few external components, the input switching characteristics can be configured in

accordance with IEC61131-2 for Type 1, 2, and 3 sensor switches.

Upon the application of load and clock signals, input data is latched in parallel into the shift register and

afterwards clocked out serially.

Cascading of multiple devices is possible by connecting the serial output of the leading device with the serial

input of the following device, enabling the design of high-channel count input modules. Multiple devices can be

cascaded through a single serial port, reducing both the isolation channels and controller inputs required.

Input status can be visually indicated via constant current LED outputs. The current limit on the inputs is set by a

single external precision resistor. An integrated voltage regulator provides a 5-V output to supply low-power

isolators. An on-chip temperature sensor provides diagnostic information for graceful shutdown and system

safety.

The SN65HVS882 is available in a 28-pin PWP PowerPAD™ package, allowing for efficient heat dissipation. The

device is characterized for operation at temperatures from -40°C to 125°C.