FEATURES

• VTT Bus Termination Output

(Output Tracks the System VREF)

• 15 A Output Current (12 A for 12-V Input)

• 3.3-V, 5-V or 12-V Input Voltage

• DDR and QDR Compatible

• On/Off Inhibit (for VTT Standby)

• Undervoltage Lockout

• Operating Temperature: –40°C to 85°C

• Efficiencies up to 91%

• Output Overcurrent Protection

(Nonlatching, Auto-Reset)

• 62 W/in3 Power Density

• Safety Agency Approvals

UL/cUL60950, EN60950, VDE

• Point-of-Load Alliance (POLA™) Compatible

DESCRIPTION

The PTHxx010Y are a series of ready-to-use switching regulator modules from Texas Instruments designed

specifically for bus termination in DDR and QDR memory applications. Operating from either a 3.3-V, 5-V or 12-V

input, the modules generate a VTT output that will source or sink up to 15 A of current (12 A for 12-V input) to

accurately track their VREF input. VTT is the required bus termination supply voltage, and VREF is the reference

voltage for the memory and chipset bus receiver comparators. VREF is usually set to half the VDDQ power supply

voltage.

Both the PTHxx010Y series employs an actively switched synchronous rectifier output to provide state-of-the-art

stepdown switching conversion. The products are small in size (1.37 in × 0.62 in), and are an ideal choice where

space, performance, and high efficiency are desired, along with the convenience of a ready-to-use module.

Operating features include an on/off inhibit and output over-current protection (source mode only). The on/off

inhibit feature allows the VTT bus to be turned off to save power in a standby mode of operation. To ensure tight

load regulation, an output remote sense is also provided. Package options include both throughhole and surface

mount configurations.