FEATURES

FLEXIBLE SUPPLY RANGE:

+5V to +12V Single Supply

±2.5V to ±6V Dual Supplies

INTERNALLY FIXED GAIN: +2 or ±1

HIGH BANDWIDTH (G = +2): 225MHz

LOW SUPPLY CURRENT: 5.1mA/ch

LOW DISABLED CURRENT: 150μA/ch

HIGH OUTPUT CURRENT: 190mA

OUTPUT VOLTAGE SWING: ±4.0V

IMPROVED HIGH-FREQUENCY PINOUT

APPLICATIONS

RGB VIDEO LINE DRIVERS

MULTIPLE LINE VIDEO DAs

PORTABLE INSTRUMENTS

ADC BUFFERS

ACTIVE FILTERS

WIDEBAND DIFFERENTIAL RECEIVERS

IMPROVED UPGRADE TO OPA3682

DESCRIPTION

The OPA3692 provides an easy-to-use, broadband fixed

gain, triple buffer amplifier. Depending on the external

connections, the internal resistor network may be used to

provide either a fixed gain of +2 video buffer, or a gain of +1

or –1 voltage buffer. Operating on a very low 5.1mA/ch

supply current, the OPA3692 offers a slew rate and output

power normally associated with a much higher supply current.

A new output stage architecture delivers high output

current with minimal headroom and crossover distortion.

This gives exceptional single-supply operation. Using a

single +5V supply, the OPA3692 can deliver a 1V to 4V

output swing with over 120mA drive current and > 200MHz

bandwidth. This combination of features makes the OPA3692

an ideal RGB line driver or single-supply, triple Analog-to-

Digital Converter (ADC) input driver.

The low 5.1mA/ch supply current of the OPA3692 is precisely

trimmed at +25°C. This trim, along with low drift over temperature,

ensures lower maximum supply current than competing

products that report only a room temperature nominal supply

current. System power can be further reduced by using the

optional disable control pin. Leaving this disable pin open, or

holding it HIGH, gives normal operation. If pulled LOW, the

OPA3692 supply current drops to less than 150μA/ch while

the output goes into a high-impedance state. This feature

may be used for power savings.