1 Features

• Core

– Arm® 32-bit Cortex®-M0+ CPU with memory

protection unit, frequency up to 80MHz

• Operating characteristics

– Extended temperature: –40°C up to 125°C

– Wide supply voltage range: 1.62V to 3.6V

• Memories

– Up to 128KB of flash memory with error

correction code (ECC)

– Up to 32KB of SRAM with hardware parity

• High-performance analog peripherals

– Two simultaneous sampling 12-bit 4Msps

analog-to-digital converters (ADCs) with up to

17 external channels

• 14-bit effective resolution at 250ksps with

hardware averaging

– One 12-bit 1Msps digital-to-analog converter

with integrated output buffer (DAC)

– Two zero-drift zero-crossover chopper op-amps

(OPA)

• 0.5μV/°C drift with chopping

• Integrated programmable gain stage, up to

32x

– One general-purpose amplifier (GPAMP)

– Three high-speed comparators (COMP) with 8-

bit reference DACs

• 32ns propagation delay in high-speed mode

• Support low-power mode operation down to

1μA

– Programmable analog connections between

ADC, OPAs, GPAMP, COMP and DAC

– Configurable 1.4V or 2.5V internal shared

voltage reference (VREF)

– Integrated temperature sensor

• Optimized low-power modes

– RUN: 101μA/MHz (CoreMark)

– SLEEP: 40μA/MHz

– STOP: 190μA at 4MHz

– STANDBY: 1.5μA with 32KHz LFXT, RTC with

SRAM, CPU state, and registers retained

– SHUTDOWN: 80nA with IO retained and IO

wake-up capability

• Intelligent digital peripherals

– 7-channel DMA controller

– Math accelerator supports DIV, SQRT, MAC

and TRIG computations

– Seven timers supporting up to 22 PWM

channels

• One 16-bit general-purpose timer supports

QEI

• Two 16-bit general-purpose timers support

low-power operation in STANDBY mode

• One 32-bit general-purpose timer

• Two 16-bit advanced timers with deadband

support and complementary outputs up to

12 PWM channels

– Two window-watchdog timers (WWDT)

– RTC with alarm and calendar mode

• Enhanced communication interfaces

– Four UART interfaces

• One supports LIN, IrDA, DALI, Smart Card,

Manchester

• Three support low-power operation in

STANDBY mode

– Two I2C interfaces supporting FM+ (1Mbit/s),

SMBus/PMBus, and wakeup from STOP mode

– Two SPIs, one SPI supports up to 32Mbits/s

• Clock system

– Internal 4MHz to 32MHz oscillator (SYSOSC)

with up to ±1.2% accuracy (SYSOSC)

– Phase-locked loop (PLL) up to 80MHz

– Internal 32kHz low-frequency oscillator

(LFOSC) with ±3% accuracy

– External 4MHz to 48MHz crystal oscillator

(HFXT)

– External 32kHz crystal oscillator(LFXT)

– External clock input

• Data integrity and encryption

– Cyclic redundancy checker (CRC-16, CRC-32)

– True random number generator (TRNG)

– AES encryption with 128-bit or 256-bit key

• Flexible I/O features

– Up to 60 GPIOs

• Two 5V-tolerant open drain IOs

• Two high-drive IOs with 20mA drive strength

• Up to 5 high speed IOs

• Development support

– 2-pin serial wire debug (SWD)

• Package options

– 64-pin LQFP (PM) (0.5mm pitch)

– 48-pin LQFP (PT) (0.5mm pitch)

– 24-pin VQFN (RGE) (0.5mm pitch)

– 48-pin VQFN (RGZ) (0.5mm pitch)

– 32-pin VQFN (RHB) (0.5mm pitch)

– 32-pin VSSOP (32DGS) (0.5mm pitch)

– 28-pin VSSOP (28DGS) (0.5mm pitch)

– 28-pin DSBGA (YCJ) (0.35mm pitch)

• Family members (also see Device Comparison)

– MSPM0G1505: 32KB flash, 16KB RAM

– MSPM0G1506: 64KB flash, 32KB RAM

– MSPM0G1507: 128KB flash, 32KB RAM

• Development kits and software (also see Tools

and Software)

– LP-MSPM0G3507 LaunchPad™ development

kit

– MSPM0 Software Development Kit (SDK)

2 Applications

• Motor control

• Home appliances

• Uninterruptible power supplies and inverters

• Electronic point of sale systems

• Medical and healthcare

• Test and measurement

• Factory automation and control

• Industrial transport

• Grid infrastructure

• Smart metering

• Communication modules

• Lighting

• Personal Electronics

3 Description

MSPM0G150x microcontrollers (MCUs) are part of the MSP highly integrated, ultra-low-power 32-bit MCU

family based on the enhanced Arm® Cortex®-M0+ 32-bit core platform operating at up to 80MHz frequency.

These cost-optimized MCUs offer high-performance analog peripheral integration, support extended temperature

ranges from -40°C to 125°C, and operate with supply voltages ranging from 1.62V to 3.6V.

The MSPM0G150x devices provide up to 128KB embedded flash program memory with built-in error correction

code (ECC) and up to 32KB SRAM with hardware parity option. These MCUs also incorporate a memory

protection unit, 7-channel DMA, math accelerator, and a variety of high-performance analog peripherals such

as two 12-bit 4-Msps ADCs, configurable internal shared voltage reference, one 12-bit 1-Msps DAC, three

high speed comparators with built-in reference DACs, two zero-drift zero-crossover op-amps with programmable

gain, and one general-purpose amplifier. These devices also offer intelligent digital peripherals such as two

16-bit advanced control timers, five general-purpose timers (with one 16-bit general-purpose timer for QEI

interface, two 16-bit general-purpose timers for STANDBY mode, and one 32-bit general-purpose timer), two

windowed-watchdog timers, and one RTC with alarm and calendar modes. These devices provide data integrity

and encryption peripherals (AES, CRC, TRNG) and enhanced communication interfaces (four UART, two I2C,

two SPI).

The TI MSPM0 family of low-power MCUs consists of devices with varying degrees of analog and digital

integration that allow customers to find the MCU that meets project needs. The MSPM0 MCU platform combines

the Arm Cortex-M0+ platform with a holistic ultra-low-power system architecture, allowing system designers to

increase performance while reducing energy consumption.

MSPM0G150x MCUs are supported by an extensive hardware and software ecosystem with reference designs

and code examples to get the design started quickly. Development kits available for purchase include a

LaunchPad™ development kit. TI also provides a free MSP Software Development Kit (SDK), which is available

as a component of Code Composer Studio™ IDE desktop and cloud version within the TI Resource Explorer.

MSPM0 MCUs are also supported by extensive online collateral, training with MSP Academy, and online support

through the TI E2E™ support forums.

For complete module descriptions, see the MSPM0 G-Series 80MHz Microcontrollers Technical Reference

Manual.