1 Features

1• Thin SOT-6 Package

• 3.0 V to 18 V Input Voltage Range

• 1.25 V to 16 V Output Voltage Range

• 750 mA Output Current

• 550 kHz (LM2736Y) and 1.6 MHz (LM2736X)

Switching Frequencies

• 350 mΩ NMOS Switch

• 30 nA Shutdown Current

• 1.25 V, 2% Internal Voltage Reference

• Internal Soft-Start

• Current-Mode, PWM Operation

• WEBENCH® Online Design Tool

• Thermal Shutdown

2 Applications

• Local Point of Load Regulation

• Core Power in HDDs

• Set-Top Boxes

• Battery Powered Devices

• USB Powered Devices

• DSL Modems

• Notebook Computers

3 Description

The LM2736 regulator is a monolithic, high frequency,

PWM step-down DC/DC converter in a 6-pin Thin SOT package. It provides all the active functions to

provide local DC/DC conversion with fast transient

response and accurate regulation in the smallest

possible PCB area.

With a minimum of external components and online

design support through WEBENCH®, the LM2736 is

easy to use. The ability to drive 750 mA loads with an internal 350 mΩ NMOS switch using state-of-the-art

0.5 μm BiCMOS technology results in the best power

density available. The world class control circuitry

allows for on-times as low as 13 ns, thus supporting exceptionally high frequency conversion over the

entire 3 V to 18 V input operating range down to the

minimum output voltage of 1.25 V. Switching

frequency is internally set to 550 kHz (LM2736Y) or

1.6 MHz (LM2736X), allowing the use of extremely

small surface mount inductors and chip capacitors.

Even though the operating frequencies are very high,

efficiencies up to 90% are easy to achieve. External

shutdown is included, featuring an ultra-low stand-by

current of 30 nA. The LM2736 utilizes current-mode control and internal compensation to provide high-

performance regulation over a wide range of

operating conditions. Additional features include

internal soft-start circuitry to reduce inrush current, pulse-by-pulse current limit, thermal shutdown, and

output over-voltage protection.