1 Features

1• Signaling Rate: 25 Mbps

• Integrated Noise Filter at the Input

• Default Output 'High' and 'Low' Options

• Low Power Consumption: Typical ICC

– 1.9 mA at 1 Mbps, 3.8 mA at 25 Mbps (5V

Supplies)

– 1.4 mA at 1 Mbps, 2.6 mA at 25 Mbps (3.3V

Supplies)

• Low Propagation Delay: 32 ns Typical (5V

Supplies)

• 3.3 V and 5 V Level Translation

• Wide TA Range Specified: –40°C to 125°C

• 65 KV/μs Transient Immunity, Typical (5V

Supplies)

• Robust Electromagnetic Compatibility (EMC)

– System-level ESD, EFT, and Surge Immunity

– Low Emissions

• Isolation Barrier Life: > 25 Years

• Operates from 3.3 V and 5 V Supplies

• Narrow Body SOIC-8 Package

• Safety and Regulatory Approvals:

– 4242 VPK Isolation per DIN V VDE V 0884-10

and DIN EN 61010-1

– 3000 VRMS Isolation for 1 minute per UL 1577

– CSA Component Acceptance Notice 5A,

IEC 60950-1 and IEC 61010-1 End Equipment

Standards

– CQC Certification per GB4943.1-2011

2 Applications

• Opto-Coupler Replacement in:

– Industrial FieldBus

– ProfiBus

– ModBus

– DeviceNet™ Data Buses

– Servo Control Interface

– Motor Control

– Power Supplies

– Battery Packs

3 Description

ISO7310x provide galvanic isolation up to 3000 VRMS

for 1 minute per UL and 4242 VPK per VDE. These devices have one isolated channel comprised of a

logic input and output buffer separated by a silicon

dioxide (SiO2) insulation barrier. Used in conjunction

with isolated power supplies, ISO7310x prevent noise

currents on a data bus or other circuit from entering the local ground and interfering with or damaging

sensitive circuitry. These devices have integrated

noise filters for harsh industrial environment where

short noise pulses may be present at the device input

pins. ISO7310x have TTL input thresholds and

operate from 3 V to 5.5 V supply levels. Through

innovative chip design and layout techniques,

electromagnetic compatibility of ISO7310x has been

significantly enhanced to enable system-level ESD,

EFT, Surge and Emissions compliance.