1 Features

• AEC-Q100 qualified for automotive applications:

– Temperature Grade 1: −40°C to 125°C, TA

– Temperature Grade 0: −40°C to 150°C, TA

• Functional Safety-Capable

– Documentation available to aid functional safety

system design

• Wide common-mode voltage:

– Operational voltage: −5V to 110V

– Survival voltage: −20V to 120V

• Bidirectional operation

• High small signal bandwidth: 1.1MHz (at all gains)

• Slew rate: 8V/μs

• Step response settling time to 1%: 1μs

• Excellent CMRR: 166dB

• Accuracy:

– Gain error (maximum)

• Version A: ±0.01%, ±1ppm/°C drift

• Version B: ±0.1%, ±5ppm/°C drift

– Offset voltage (maximum)

• Version A: ±10μV, ±0.1μV/°C drift

• Version B: ±150μV, ±0.5μV/°C drift

• Available gains:

– INA296A1-Q1 : 10V/V

– INA296A2-Q1 : 20V/V

– INA296A3-Q1 : 50V/V

– INA296A4-Q1 : 100V/V

– INA296A5-Q1 : 200V/V

• Package options: SOT23-8, VSSOP-8, SOIC-8,

VSSOP-10

2 Applications

• DC/DC converter

• Battery management systems (BMS)

• Fuel cell control unit

• Smart junction box

3 Description

The INA296x-Q1 is an ultra-precise, bidirectional

current sense amplifier that can measure voltage

drops across shunt resistors over a wide commonmode

range from –5V to 110V, independent of

the supply voltage. The high-precision current

measurement is achieved through a combination of

low offset voltage (±10μV, maximum), small gain error

(±0.01%, maximum) and a high DC CMRR (typical

166dB). The INA296x-Q1 is not only designed for high

voltage, bidirectional DC current measurements, but

also for high-speed applications (such as transient

detection and fast overcurrent protection) with a high

signal bandwidth of 1.1MHz and fast settling time.

The INA296x-Q1 operates from a supply of 2.7V to

20V, drawing 2.5mA of supply current. The INA296x-

Q1 is available in five gain options: 10V/V, 20V/V,

50V/V, 100V/V, and 200V/V. Multiple gain options

allow for optimization between available shunt resistor

values and wide output dynamic range requirements.

The INA296x-Q1 Grade 1 is specified over operating

temperature range of −40°C to 125°C and Grade 0

over operating temperature range of −40°C to 150°C.