1FEATURES

2• AECQ-100 Grade 3

• DC - 3.125 Gbps Low Jitter, Low Skew, Low

Power Operation

• Pin Configurable, Fully Differential, Non-

Blocking Architecture

• Pin Selectable Transmit Pre-Emphasis and

Receive Equalization Eliminate Data

Dependant Jitter

• Wide Input Common Mode Voltage Range

Allows DC-coupled Interface to CML and

LVPECL Drivers

• On-Chip 100Ω Input and Output Termination

Minimizes Insertion and Return Losses,

Reduces Component Count and Minimizes

Board Space

• 8 kV ESD on LVDS I/O pins Protects Adjoining

components

• Small 4 mm x 4 mm WQFN-16 Space Saving

Package

APPLICATIONS

• Automotive Display Applications

• Clock and Data Buffering and Muxing

• OC-48 / STM-16

• SD/HD/3GHD SDI Routers

DESCRIPTION

The DS25CP102Q is a 3.125 Gbps 2x2 LVDS

crosspoint switch optimized for high-speed signal

routing and switching over lossy FR-4 printed circuit

board backplanes and balanced cables. Fully

differential signal paths ensure exceptional signal

integrity and noise immunity. The non-blocking

architecture allows connections of any input to any

output or outputs.

The DS25CP102Q features two levels (Off and On)

of transmit pre-emphasis (PE) and two levels (Off and

On) of receive equalization (EQ).

Wide input common mode range allows the switch to

accept signals with LVDS, CML and LVPECL levels;

the output levels are LVDS. A very small package

footprint requires a minimal space on the board while

the flow-through pinout allows easy board layout. Each differential input and output is internally

terminated with a 100Ω resistor to lower device

insertion and return losses, reduce component count

and further minimize board space.