1 Features

1• Qualified for automotive applications

– –40°C to 105°C operating temperature range

for DMD array

• Supports 405-nm illumination sources

• The DLP5534-Q1 automotive chipset includes:

– DLP5534-Q1 DMD

– DLPC230-Q1 DMD controller

– TPS99000-Q1 system management and

illumination controller

• 0.55-inch diagonal micromirror array

– 7.6-μm micromirror pitch

– ±12° micromirror tilt angle (relative to flat state)

– Bottom illumination for optimal efficiency and

optical engine size

– Supports 1152 × 576 input resolution

– Compatible with LED or laser illumination

• 600-MHz sub-LVDS DMD interface for low power

and emission

• 10-kHz DMD refresh rate over temperature

extremes

• Built-in self test of DMD memory cells

2 Applications

• Transparent window display for front, side, and

rear vehicle windows

3 Description

The DLP5534-Q1 automotive DMD, combined with

the DLPC230-Q1 DMD controller and TPS99000-Q1

system management and illumination controller,

provides the capability to achieve a high performance

transparent window display projector. The chipset can

be coupled with 405-nm illumination sources (e.g.

LEDs or lasers) in an optical projection system to

project onto windows embedded with emissive

phosphor films. When these transparent emissive

films are excited with 405-nm light from a DLP5534-

Q1 projector, the window becomes a display emitting

light in the visible spectrum. The DLP5534-Q1 has

more than 3 times the optical throughput of the

preceding DLP3034-Q1 automotive DMD enabling

brighter and larger displays. In addition, this chipset

enables high power optical systems with a wide

dynamic range and fast switching speeds that do not

vary with temperature.