1 Features

• DLPC84x4 controllers support the following 1080p

DMDs:

– DLPC8424 supports the DLP230NP DMD up to

1080p at 60Hz and 540p at 120Hz (3D)

– DLPC8444 supports the DLP472NPDMD up to

1080p at 240Hz (2D) and 120Hz (3D)

– DLPC8454 supports the DLP473NE DMD up to

1080p at 240Hz (2D) and 120Hz (3D)

• Single V-by-One® HS video input port with 1, 2, 4,

or 8 lanes

– Up to 600MHz pixel clock and 2160p at 60Hz

– Up to 3.0Gbps per input transmission rate

• Two FPD-Link video input ports, 6 lanes per port

– Up to 300MHz pixel clock and 1080p at 120Hz

• Input formats supported

– RGB and YCbCr

– 4:4:4 and 4:2:2

• Internal Arm® processor

– 52 configurable GPIOs

– PWM generator

– Capture and delay timers

– USB 2.0 high-speed controller

– SPI and I2C controllers

– UART and interrupt controllers

• Warping engine

– 1D and 2D keystone correction

– Embedded partial frame memory for video

processing

• Additional image processing

– Overlap color support

– Variable refresh rate (VRR) support

– Rolling buffer for reduced frame latency

– DynamicBlack

– Frame rate multiplication

– Color coordinate adjustment

– Color temperature adjustment

– Programmable degamma

– Read-side spatial-temporal multiplexing

– Integrated support for 3-D display

• Splash screen display

• Serial flash for μP and PWM sequences

• System control

– DMD power and reset driver control

– DMD horizontal and vertical image flip

• JTAG boundary scan test support

• Supports LED, RGB laser, and laser-phosphor

illumination-based systems

2 Applications

• Mobile smart TV

• Mobile projector

• Digital signage

• Lifestyle projector

• Education and Enterprise projector (DLP473NE)

3 Description

The DLPC8424, DLPC8444, and DLPC8454 are

1080p FHD digital display controllers for TI DLP®

Products. The DLP chipset comprises one display

controller, one matched DMD, the DLPA3085 or

DLPA3082 power management IC, and the DLPA100

motor driver IC (for laser-phosphor illumination

systems only). This chipset fits display systems that

require high resolution and high brightness in a small

form factor. For reliable operation, the DLPC8424

or DLPC8444 or DLPC8454 display controller must

always be used with the correct DMD and the

DLPA3085 or DLPA3082 PMIC. Note: DLPA3085 is

not supported by the DLPC8454.