1 Features

1• Automotive qualified

– –40°C to 105°C operating temperature range

for DMD array

• Supports 405-nm illumination sources

• 0.3-inch diagonal micromirror array

– 7.6-μm micromirror pitch

– ±12° micromirror tilt angle (relative to flat state)

– Side illumination for optimized efficiency

• WVGA (864 × 480) resolution

• Polarization independent spatial light modulator

– Compatible with LED or laser light sources

• Low-power consumption: 105-mW (typical)

• Operating temperature range: –40°C to 105°C

• Hermetic package with 2.5°C/W thermal efficiency

• JTAG boundary scan to allow in-system validation

• Compatible with the DLPC120-Q1 automotive

DMD controller

• 78-MHz DDR DMD interface

2 Applications

• Transparent window display for front, side, and

rear vehicle windows

3 Description

The DLP3034-Q1 automotive DMD is primarily

targeted for transparent window display applications.

This chipset can be coupled with 405-nm illumination

sources (e.g. LEDs or lasers) in an optical projection

system to project onto windows embedded with

emissive phosphor films. When these transparent

emissive films are excited with 405-nm light from a

DLP3034-Q1 projector, the window becomes a

display emitting light in the visible spectrum. In

addition, this chipset enables high power optical

systems with a wide dynamic range and fast

switching speeds that do not vary with temperature.