FEATURES

· Controlled Baseline

– One Assembly

– One Test Site

– One Fabrication Site

· Extended Temperature Performance of

–55°C to 125°C

· Enhanced Diminishing Manufacturing

Sources (DMS) Support

· Enhanced Product-Change Notification

· Qualification Pedigree (1)

· 14-Bit Dual Transmit Digital-to-Analog

Converter (DAC)

· 200-MSPS Update Rate

· Single Supply: 3 V to 3.6 V

· High Spurious-Free Dynamic Range (SFDR):

84 dBc at 5 MHz

· High Third-Order Two-Tone Intermodulation (IMD3): 79 dBc at 15.1 MHz and 16.1 MHz

· WCDMA Adjacent Channel Leakage Ratio

(ACLR): 78 dB at Baseband

· WCDMA ACLR: 73 dB at 30.72 MHz

· Independent or Single Resistor Gain Control

· Dual or Interleaved Data

· On-Chip 1.2-V Reference

· Low Power: 330 mW

· Power-Down Mode: 9 mW

· Package: 48-Pin Thin-Quad Flat Pack (TQFP)

APPLICATIONS

· Cellular Base Transceiver Station Transmit

Channel

– CDMA: W-CDMA, CDMA2000, IS-95

– TDMA: GSM, IS-136, EDGE/UWC-136

· Medical/Test Instrumentation

· Arbitrary Waveform Generators (ARB)

· Direct Digital Synthesis (DDS)

· Cable Modem Termination System (CMTS)

DESCRIPTION

The DAC5672 is a monolithic, dual-channel, 14-bit, high-speed digital-to-analog converter (DAC) with on-chip

voltage reference.

Operating with update rates of up to 200 MSPS, the DAC5672 offers exceptional dynamic performance, tight

gain, and offset matching characteristics that make it suitable in either I/Q baseband or direct IF communication

applications.

Each DAC has a high-impedance, differential-current output, suitable for single-ended or differential

analog-output configurations. External resistors allow scaling the full-scale output current for each DAC

separately or together, typically between 2 mA and 20 mA. An accurate on-chip voltage reference is temperature

compensated and delivers a stable 1.2-V reference voltage. Optionally, an external reference may be used.

The DAC5672 has two 14-bit parallel input ports with separate clocks and data latches. For flexibility, the

DAC5672 also supports multiplexed data for each DAC on one port when operating in the interleaved mode.

The DAC5672 has been specifically designed for a differential transformer-coupled output with a 50-W

doubly-terminated load. For a 20-mA full-scale output current, both a 4:1 impedance ratio (resulting in an output

power of 4 dBm) and 1:1 impedance ratio transformer (–2 dBm output power) are supported.

The DAC5672 is available in a 48-pin thin quad flat pack (TQFP) package. Pin compatibility between family

members provides 12-bit (DAC5662) and 14-bit (DAC5672) resolution. Furthermore, the DAC5672 is pin

compatible to the DAC2904 and AD9767 dual DACs. The device is characterized for operation over the military

temperature range of –55°C to 125°C.