1 Features

• Distributes One Differential Clock Input Pair

LVPECL to 10 Differential LVPECL

• Fully Compatible With LVECL and LVPECL

• Supports a Wide Supply Voltage Range From

2.375V to 3.8V

• Selectable Clock Input Through CLK_SEL

• Low-Output Skew (Typical 15ps) for Clock-

Distribution Applications

– Additive Jitter Less Than 1ps

– Propagation Delay Less Than 355ps

– Open Input Default State

– LVDS, CML, SSTL input Compatible

• VBB Reference Voltage Output for Single-Ended

Clocking

• Frequency Range From DC to 3.5GHz

• Supports Defense, Aerospace, and Medical

Applications

– Controlled Baseline

– One Assembly and Test Site

– One Fabrication Site

– Available in Military (–55°C to 125°C)

Temperature Range 1

– Extended Product Life Cycle

– Extended Product-Change Notification

– Product Traceability

2 Applications

• Designed for Driving 50Ω Transmission Lines

• High-Performance Clock Distribution

• Engineering Evaluation (/EM) Samples Are

Available 2

3 Description

The CDCLVP111-SP clock driver distributes one

differential clock pair of LVPECL input, (CLK0, CLK1)

to ten pairs of differential LVPECL clock (Q0, Q9)

outputs with minimum skew for clock distribution. The

CDCLVP111-SP can accept two clock sources into an

input multiplexer. The CDCLVP111-SP is specifically

designed for driving 50Ω transmission lines. When

an output pin is not used, leaving the pin open is

recommended to reduce power consumption. If only

one of the output pins from a differential pair is used,

the other output pin must be identically terminated to

50Ω.

The VBB reference voltage output is used if singleended

input operation is required. In this case, the

VBB pin must be connected to CLK0 and bypassed to

GND using a 10nF capacitor.

For high-speed performance, the differential mode is

strongly recommended.

The CDCLVP111-SP is characterized for operation

from –55°C to 125°C.