FEATURES

• RF/Layout

– 2.4-GHz IEEE 802.15.4 Compliant RF

Transceiver

– Excellent Receiver Sensitivity and

Robustness to Interference

– Programmable Output Power Up to 4.5 dBm

– Very Few External Components

– Only a Single Crystal Needed for

Asynchronous Networks

– 6-mm × 6-mm QFN40 Package

– Suitable for Systems Targeting Compliance

With Worldwide Radio-Frequency

Regulations: ETSI EN 300 328 and EN 300

440 (Europe), FCC CFR47 Part 15 (US) and

ARIB STD-T-66 (Japan)

Low Power

– Active-Mode RX (CPU Idle): 24 mA

– Active Mode TX at 1 dBm (CPU Idle): 29 mA

– Power Mode 1 (4 μs Wake-Up): 0.2 mA

– Power Mode 2 (Sleep Timer Running): 1 μA

– Power Mode 3 (External Interrupts): 0.4 μA

– Wide Supply-Voltage Range (2 V–3.6 V)

Microcontroller

– High-Performance and Low-Power 8051

Microcontroller Core With Code Prefetch

– 32-, 64-, 128-, or 256-KB

In-System-Programmable Flash

– 8-KB RAM With Retention in All Power

Modes

– Hardware Debug Support

Peripherals

– Powerful Five-Channel DMA

– Integrated High-Performance Op-Amp and

Ultralow-Power Comparator

– IEEE 802.15.4 MAC Timer, General-Purpose

Timers (One 16-Bit, Two 8-Bit)

– IR Generation Circuitry

– 32-kHz Sleep Timer With Capture

– CSMA/CA Hardware Support

– Accurate Digital RSSI/LQI Support

– Battery Monitor and Temperature Sensor

– 12-Bit ADC With Eight Channels and

Configurable Resolution

– AES Security Coprocessor

– Two Powerful USARTs With Support for

Several Serial Protocols

– 21 General-Purpose I/O Pins

(19 × 4 mA, 2 × 20 mA)

– Watchdog Timer

• Development Tools

– CC2530 Development Kit

– CC2530 ZigBee® Development Kit

– CC2530 RemoTI™ Development Kit for

RF4CE

– SmartRF™ Software

– Packet Sniffer

– IAR Embedded Workbench™ Available

APPLICATIONS

• 2.4-GHz IEEE 802.15.4 Systems

• RF4CE Remote Control Systems (64-KB Flash

and Higher)

• ZigBee Systems (256-KB Flash)

• Home/Building Automation

• Lighting Systems

• Industrial Control and Monitoring

• Low-Power Wireless Sensor Networks

• Consumer Electronics

• Health Care

DESCRIPTION

The CC2530 is a true system-on-chip (SoC) solution for IEEE 802.15.4, Zigbee and RF4CE applications. It

enables robust network nodes to be built with very low total bill-of-material costs. The CC2530 combines the

excellent performance of a leading RF transceiver with an industry-standard enhanced 8051 MCU, in-system

programmable flash memory, 8-KB RAM, and many other powerful features. The CC2530 comes in four different

flash versions: CC2530F32/64/128/256, with 32/64/128/256 KB of flash memory, respectively. The CC2530 has

various operating modes, making it highly suited for systems where ultralow power consumption is required.

Short transition times between operating modes further ensure low energy consumption.

Combined with the industry-leading and golden-unit-status ZigBee protocol stack ( Z-Stack™) from Texas

Instruments, the CC2530F256 provides a robust and complete ZigBee solution.

Combined with the golden-unit-status RemoTI stack from Texas Instruments, the CC2530F64 and higher provide

a robust and complete ZigBee RF4CE remote-control solution.