1.1 Features 1

• World's First Dual-Band (Sub-1 GHz and 2.4 GHz)

Wireless Microcontroller

• Microcontroller

– Powerful Arm® Cortex®-M3 Processor

– EEMBC CoreMark® Score: 142

– EEMBC ULPBench™ Score: 158

– Clock Speed up to 48-MHz

– 128KB of In-System Programmable Flash

– 8KB of SRAM for Cache

(or as General-Purpose RAM)

– 20KB of Ultra-Low-Leakage SRAM

– 2-Pin cJTAG and JTAG Debugging

– Supports Over-the-Air (OTA) Update

• Ultra-Low-Power Sensor Controller

– Can Run Autonomously From the Rest of the

System

– 16-Bit Architecture

– 2KB of Ultra-Low-Leakage SRAM for Code and

Data

• Efficient Code-Size Architecture, Placing Parts of

TI-RTOS, Drivers, Bluetooth® low energy

Controller and Bootloader in ROM

• RoHS-Compliant Package

– 7-mm × 7-mm RGZ VQFN48 (30 GPIOs)

– 5-mm × 5-mm RHB VQFN32 (15 GPIOs)

– 4-mm × 4-mm RSM VQFN32 (10 GPIOs)

• Peripherals

– All Digital Peripheral Pins Can Be Routed to

Any GPIO

– Four General-Purpose Timer Modules

(Eight 16-Bit or Four 32-Bit Timers, PWM Each)

– 12-Bit ADC, 200 ksamples/s, 8-Channel Analog

MUX

– Continuous Time Comparator

– Ultra-Low-Power Clocked Comparator

– Programmable Current Source

– UART

– 2× SSI (SPI, MICROWIRE, TI)

– I2C, I2S

– Real-Time Clock (RTC)

– AES-128 Security Module

– True Random Number Generator (TRNG)

– Support for Eight Capacitive Sensing Buttons

– Integrated Temperature Sensor

SPACER

• External System

– On-Chip Internal DC/DC Converter

– Seamless Integration With the SimpleLink™

CC1190 and CC2592 Range Extender

• Low Power

– Wide Supply Voltage Range: 1.8 to 3.8 V

– RX: 5.4 mA (Sub-1 GHz), 6.4 mA (Bluetooth low

energy, 2.4 GHz)

– TX at +10 dBm: 13.4 mA (Sub-1 GHz)

– TX at +9 dBm: 22.3 mA (Bluetooth low energy,

2.4 GHz)

– TX at +0 dBm: 10.5 mA (Bluetooth low energy,

2.4 GHz)

– Active-Mode MCU 48 MHz Running Coremark:

2.5 mA (51 μA/MHz)

– Active-Mode MCU: 48.5 CoreMark/mA

– Active-Mode Sensor Controller at 24 MHz:

0.4 mA + 8.2 μA/MHz

– Sensor Controller, One Wakeup Every Second

Performing One 12-Bit ADC Sampling: 0.95 μA

– Standby: 0.7 μA (RTC Running and RAM and

CPU Retention)

– Shutdown: 185 nA (Wakeup on External Events)

• RF Section

– 2.4-GHz RF Transceiver Compatible With

Bluetooth low energy 4.2 Specification

– Excellent Receiver Sensitivity –124 dBm Using

Long-Range Mode, –110 dBm at 50 kbps

(Sub-1 GHz),

–87 dBm at Bluetooth low energy

– Excellent Selectivity (±100 kHz): 56 dB

– Excellent Blocking Performance (±10 MHz):

90 dB

– Programmable Output Power up to +15 dBm

(Sub-1 GHz) and +9 dBm at 2.4 GHz (Bluetooth

low energy)

– Single-Ended or Differential RF Interface

– Suitable for Systems Targeting Compliance With

Worldwide Radio Frequency Regulations

– ETSI EN 300 220, EN 303 204 (Europe)

– EN 300 440 Class 2 (Europe)

– EN 300 328 (Europe)

– FCC CFR47 Part 15 (US)

– ARIB STD-T66 (Japan)

– ARIB STD-T108 (Japan)

– Wireless M-Bus (EN 13757-4) and IEEE®

802.15.4g PHY

• Tools and Development Environment

– Full-Feature and Low-Cost Development Kits

– Multiple Reference Designs for Different RF

Configurations

– Packet Sniffer PC Software

– Sensor Controller Studio

– SmartRF™ Studio

– SmartRF Flash Programmer 2

– IAR Embedded Workbench® for Arm

– Code Composer Studio™ (CCS) IDE

– CCS UniFlash

1.2 Applications

• 315-, 433-, 470-, 500-, 779-, 868-, 915-,

920-MHz and 2.4-GHz ISM and SRD Systems

• Low-Power Wireless Systems

With 50-kHz to 5-MHz Channel Spacing

• Home and Building Automation

• Wireless Alarm and Security Systems

• Industrial Monitoring and Control

• Bluetooth low energy Beacon Management

• Bluetooth low energy Commissioning

• Smart Grid and Automatic Meter Reading

• Wireless Healthcare Applications

• Wireless Sensor Networks

• Active RFID

• IEEE 802.15.4g, IP-Enabled Smart Objects

(6LoWPAN), Wireless M-Bus, KNX Systems,

Wi-SUN™, and Proprietary Systems

• Energy-Harvesting Applications

• Electronic Shelf Label (ESL)

• Long-Range Sensor Applications

• Heat-Cost Allocators

1.3 Description

The CC1350 device is a cost-effective, ultra-low-power, dual-band RF device from Texas Instruments™

that is part of the SimpleLink™ microcontroller (MCU) platform. The platform consists of Wi-Fi®, Bluetooth®

low energy, Sub-1 GHz, Ethernet, Zigbee®, Thread, and host MCUs. These devices all share a common,

easy-to-use development environment with a single core software development kit (SDK) and a rich tool

set. A one-time integration of the SimpleLink platform enables users to add any combination of devices

from the portfolio into their design, allowing 100 percent code reuse when design requirements change.

For more information, visit www.ti.com/simplelink.

With very low active RF and MCU current consumption, in addition to flexible low-power modes, the

device provides excellent battery life and allows long-range operation on small coin-cell batteries and in

energy harvesting applications.

The CC1350 is a device in the CC13xx and CC26xx family of cost-effective, ultra-low-power wireless

MCUs capable of handling both Sub-1 GHz and 2.4-GHz RF frequencies. The CC1350 device combines a

flexible, very low-power RF transceiver with a powerful 48-MHz Arm® Cortex®-M3 microcontroller in a

platform supporting multiple physical layers and RF standards. A dedicated Radio Controller (Cortex®-M0)

handles low-level RF protocol commands that are stored in ROM or RAM, thus ensuring ultra-low power

and flexibility to handle both Sub-1 GHz protocols and 2.4 GHz protocols (for example Bluetooth low

energy). This enables the combination of a Sub-1 GHz communication solution that offers the best

possible RF range together with a Bluetooth low energy smartphone connection that enables great user

experience through a phone application. The Sub-1 GHz only device in this family is the CC1310.

The CC1350 device is a highly integrated, true single-chip solution incorporating a complete RF system

and an on-chip DC/DC converter.

Sensors can be handled in a very low-power manner by a dedicated autonomous ultra-low-power MCU

that can be configured to handle analog and digital sensors; thus the main MCU (Arm® Cortex®-M3) can

maximize sleep time.

The power and clock management and radio systems of the CC1350 device require specific configuration

and handling by software to operate correctly, which has been implemented in the TI-RTOS. TI

recommends using this software framework for all application development on the device. The complete

TI-RTOS and device drivers are offered free of charge in source code.