1.1 Features 1

• 14-Bit resolution

• Sample rate:

– DAC: 9GSPS

– ADC: 3GSPS

• RF Frequency range: up to 5.2 GHz

• Maximum RF signal bandwidth

– Quad-channel mode (4T4R): 800 MHz (singleband);

300 MHz (dual-band)

– Dual-channel mode (2T2R): 1200 MHz

(TX)/1000 MHz (RX) (single-band);

800MHz(dual-band)

• On-chip dual selectable DSAs per RX channel

• Integrated TX DSA functionality

• Digital:

– Dual band digital up-converters (DUCs)

– Dual Band digital down-converters (DDCs)

– 32-Bit NCOs for DUCs/DDCs

– Interpolation ratio: 6x, 8x, 9x, 12x, 16x, 18x,

24x, 36x

– Decimation ratio: /2, /3, /4, /6, /8, /9, /12, /16,

/18, /24, /32

– RX/FB Dynamic switching for TDD

• Interface:

– 8 SerDes Transceivers up to 15Gbps

– 16-Bit and 12-bit JESD204B transport layer

formatting with 8b/10b encoding

– Subclass 1 multi-device synchronization

• Clock:

– Internal PLL/VCO to generate DAC and ADC

clocks

• Package: 17mm x 17mm FC BGA, 0.8mm pitch

• Power supplies: 1.85 V, 1.15 V, 1.0 V, –1.8 V

1.2 Applications

• Cellular base stations

• Wideband communications

• Microwave backhaul

• Distributed antenna systems (DAS)

1.3 Description

The AFE76xx is a family of high performance, quad/dual channel, 14-bit, integrated RF sampling analog

front ends (AFEs) with 9 GSPS DACs and 3 GSPS ADCs, capable of synthesizing and digitizing wideband

signals. High dynamic range allows the AFE76xx to generate and digitize 3G/4G signals for wireless base

stations. In TDD mode, the receiver channel can be configured to dynamically switching between traffic

receiver (TDD RX) status and wideband feedback receiver (TDD FB) status to assist DPD (Digital Pre-

Distortion) of the Power Amplifier (PA) on the transmitter path.

The AFE76xx family has integrated DSA on the receiver channels and also supports DSA equivalent

functionality on the transmitter channels. Each receiver channel has one analog RF peak power detector

and various digital power detectors to assist AGC control for receiver channels, and two RF overload

detectors for device reliability protection. The AFE76xx family has 8 of JESD204B compatible SerDes

transceivers running up to 15 Gbps. The devices have up to two DUCs per TX channel and two DDCs per

RX channel, with multiple interpolation/decimation rates and digital quadrature modulators/demodulators

with independent, frequency flexible NCOs. The devices support more than 1000 MHz (800 MHz as

4T4R) RF signal bandwidth in single-band mode, and up to 800 MHz (300 MHz as 4T4R) RF signal

bandwidth per band in dual-band mode. A low jitter PLL/VCO simplifies the sampling clock generation by

allowing use of a lower frequency reference clock.