1FEATURES

2• Single-ended input

• Internal sample-and-hold function

• Low voltage (single +3V) operation

• Small package

• Power-down feature

KEY SPECIFICATIONS

• Resolution 8 bits

• Conversion rate 60 MSPS

• DNL ±0.25 LSB (typ)

• INL +0.5/−0.2 LSB (typ)

• SNR (10.1 MHz) 48 dB (typ)

• ENOB (10.1 MHz) 7.6 bits (typ)

• THD (10.1 MHz) −57 dB (typ)

• Latency 5 Clock Cycles

• No missing codes Ensured

• Power Consumption

– Operating 0.65 mW/MSPS (typ)

– Power Down Mode 1.0 mW (typ)

APPLICATIONS

• Digital Imaging

• Set-top boxes

• Portable Instrumentation

• Communication Systems

• X-ray imaging

• Viterbi decoders

DESCRIPTION

The ADC08L060 is a low-power, 8-bit, monolithic

analog-to-digital converter with an on-chip track-and-

hold circuit. Optimized for low cost, low power, small

size and ease of use, this product operates at

conversion rates of 10 MSPS to 60 MSPS while

consuming just 0.65 mW per MHz of clock frequency, or 39 mW at 60 MSPS. Raising the PD pin puts the

ADC08L060 into a Power Down mode where it

consumes about 1 mW.

The unique architecture achieves 7.6 Effective Bits.

The ADC08L060 is resistant to latch-up and the

outputs are short-circuit proof. The top and bottom of

the ADC08L060s reference ladder are available for connections, enabling a wide range of input

possibilities. The digital outputs are TTL/CMOS

compatible with a separate output power supply pin

to support interfacing with 1.8V to 3V logic. The

output coding is straight binary and the digital inputs

(CLK and PD) are TTL/CMOS compatible.

The ADC08L060 is offered in a 24-lead plastic

package (TSSOP) and is specified over the industrial

temperature range of −40°C to +85°C.