1 Features

1• ESD Protection Exceeds JESD 22

– 2000-V Human-Body Model

– 1000-V Charged-Device Model

• Available in the Texas Instruments

NanoFree™ Package

• Supports 5-V VCC Operation

• Inputs Accept Voltages to 5.5 V

• Max tpd of 4.3 ns at 3.3 V

• Low Power Consumption, 10-μA Max ICC

• ±24-mA Output Drive at 3.3 V

• Typical VOLP (Output Ground Bounce)

< 0.8 V at VCC = 3.3 V, TA = 25°C

• Typical VOHV (Output VOH Undershoot)

> 2 V at VCC = 3.3 V, TA = 25°C

• Ioff Supports Live Insertion, Partial-Power-Down

Mode, and Back-Drive Protection

• Can Be Used as a Down Translator to Translate

Inputs From a Max of 5.5 V Down

to the VCC Level

• Latch-Up Performance Exceeds 100 mA Per

JESD 78, Class II

2 Applications

• Cable Modem Termination Systems

• High-Speed Data Acquisition and Generation

• Military: Radars and Sonars

• Motor Controls: High-Voltage

• Power Line Communication Modems

• SSDs: Internal or External

• Video Broadcasting and Infrastructure: Scalable

Platforms

• Video Broadcasting: IP-Based Multi-Format

Transcoders

• Video Communications Systems

3 Description

The SN74LVC2G125 device is a dual bus buffer

gate, designed for 1.65-V to 5.5-V VCC operation.

This device features dual line drivers with 3-state

outputs. The outputs are disabled when the

associated output-enable (OE) input is high.

NanoFree™ package technology is a major

breakthrough in IC packaging concepts, using the die

as the package.

To ensure the high-impedance state during power up

or power down, OE should be tied to VCC through a

pullup resistor; the minimum value of the resistor is

determined by the current-sinking capability of the

driver.

This device is fully specified for partial-power-down

applications using Ioff. The Ioff circuitry disables the

outputs, preventing damaging current backflow

through the device when it is powered down.