1 Features

• 7.55 Gbps (6 Gbps video payload) serializer

supports high-speed sensors including 8 MP+

imagers

• Supports 3 data rates: 7.55 Gbps, 3.775 Gbps and

1.8875 Gbps.

• Power-over-Coax (PoC) compatible transceiver

• Single MIPI D-PHY port with 4 lanes

– Compliant to MIPI D-PHY v2.1

– 1 Clock lane and 1, 2 or 4 configurable data

lanes

– Up to 1.5 Gbps/lane

– Supports polarity pin inversion (p/n)

– Up to 16 virtual channels

• Single port MIPI CSI-2 receiver

– Compliant to MIPI CSI-2 v2.1

– Supports multiple data types and multiexposure

• Advanced data protection and diagnostics

including CRC data protection, sensor data

integrity check, I2C write protection, voltage and

temperature measurement, programmable alarm

and line fault detection

• Flexible programmable output clock generator

• Supports single-ended coaxial cable and shieldedtwisted-

pair (STP) cable

• Ultra-low latency bidirectional I2C and GPIO

control channel enables ISP control from ECU

• Single 1.8 V power supply

• Compatible with all V3Link Vision / Enhanced

Vision deserializers

• Pin-to-pin compatible with the TSER953 serializer

2 Applications

• Appliances

• Video surveillance

• Elevators and escalators

• Industrial robots

• Machine vision

• Patient monitoring and diagnostics

• Imaging

3 Description

The TSER9615 serializer is part of TI's V3Link

Enhanced Vision family and is designed to support

ultra-high-speed data sensors including 8MP+

Imagers, satellite RADAR, LIDAR, and time-of-flight

(ToF) sensors. The serializer delivers an 7.55 Gbps

forward channel and an ultra-low latency, 47.1875

Mbps bidirectional control channel and supports

power over a single coax (PoC) or STP cable. When

the TSER9615 is used in Enhanced Vision mode, it

provides the possibility to select between three data

rates: 7.55 Gbps, 3.775 Gbps and 1.8875 Gbps.

The TSER9615 features advanced data protection

and diagnostic features. Together with a companion

deserializer, the TSER9615 delivers precise multicamera

sensor clock and sensor synchronization.

The TSER9615 is qualified with a wide temperature

range of –20°C to 85°C. The serializer comes in

a small 5 mm × 5 mm VQFN package for spaceconstrained

sensor applications.