1 Features

• AEC-Q100 qualified for automotive applications:

– Temperature grade 1: –40°C to +125°C, TA

• Z-axis Hall-effect switch

• Ultra-low power consumption (typical ICC(AVG)):

– 10Hz version: 1.25μA at 3V

– 20Hz versions: 1.37μA at 3V

• Operating VCC range: 1.65V to 5.5V

• High-precision magnetic thresholds (typical BOP):

– 1.8mT with 0.6mT hysteresis

– 3mT with 1.2mT or 1.5mT hysteresis

– 15mT with 6.5mT hysteresis

– 37mT with 7mT hysteresis

• Omnipolar or unipolar magnetic response

• Push-pull or open-drain output options

• Active-low or active-high output options

• Industry-standard SOT-23 (DBZ) package

2 Applications

• Door handles and E-latches

• Steering column stalk shifter

• Visor, vanity mirror, or glove box light up

• Open, close sensor for trunks

• Wiper motor position sensor

• Brake pedal or rear light actuator

• Sunroofs and tailgates

• Power seat and rocker switches

• Automotive body motor position feedback

3 Description

The TMAG5131-Q1 is a low-power, high-precision,

Hall-effect sensor designed for the most compact and

battery-critical automotive applications. The device

is offered in multiple magnetic thresholds, sampling

rates and output types to accommodate various

applications.

When the applied magnetic flux density exceeds the

operating point (BOP) threshold, the device outputs

a low voltage (for active-low versions). The output

stays low until the flux density decreases to less than

the release point (BRP), at which point the device

outputs a high voltage. The output (low/high) behavior

is inversed for active high versions. The omnipolar

magnetic response allows the device output to be

sensitive to positive and negative magnetic flux

through the Z-axis of the package, while the unipolar

version responds only to a positive magnetic flux.

The TMAG5131-Q1 is internally power cycled to

operate with a low current consumption. At 3V, the

10Hz version has an average current consumption of

1.25μA, and the 20Hz versions consume 1.37μA.

The TMAG5131-Q1 is available in an industrystandard

SOT-23 package and pin out.

The device operates at a VCC range of 1.65V to 5.5V

as well as an extended temperature range of –40°C to

125°C.