1 Features

• ADC channel

– Mono high performance ADC

– Performance:

• Line differential input dynamic range: 118 dB

• Mic differential input dynamic range: 118 dB

• THD+N: –95 dB

– Input voltage:

• Differential, 2-VRMS full-scale inputs

• Single-ended, 1-VRMS full-scale inputs

– Input mix / mux options

– Sample rate (fS) = 8 kHz to 768 kHz

– Programmable microphone bias (Up to 3V)

• DAC channel

– Mono high performance DAC

– DAC performance:

• DAC to line out dynamic range: 119 dB

• DAC to HP out dynamic range: 115 dB

• THD+N: –95 dB

– Head phone / line Out output voltage:

• Differential, 2-VRMS full-scale

• Single-ended, 1-VRMS full-scale

– DAC sample Rates (fs) = 8 KHz to 768 KHz

• Common features

– Up to 4 record channels

• 1 Channel analog + 3 channel digital

• 4 Channel digital

– Analog input to output by-pass

– Voice activity detection

– Battery protection

– Signal distortion limiter

– Thermal foldback

– Low latency filter selection

– Programmable HPF and biquad filters

– I2C & SPI control interface

– Audio serial interface

• Format: TDM, I2S or left justified

• Word length: 16,20,24 or 32 bits

– Programmable PLL for flexible clocking

– Low power modes

• TBD mW for playback

• TBD mW for record

– Single supply operation: 1.8 V or 3.3 V

– I/O supply operation: 1.2 V or 1.8 V or 3.3 V

– Temperature grade 1: –40°C ≤ TA ≤ +125°C

2 Applications

• Land Mobile Radio

• IP Network Camera

• IP Telephone

• Video Conference System

• Professional audio mixer/control surface

3 Description

The TAC5211 is a high performance Mono Codec

with 2 VRMS differential Input, 118 dB Mono ADC

and 2 VRMS Mono DAC. The TAC5211 supports both

differential and Single-ended input and output. The

device supports both Microphone and Line In input on

the ADC Channel. DAC Output can be configured for

either Line Out or Head Phone Load. TAC5211 can

drive up to 62.5 mW into a Headphone Load. The

TAC5211 integrates programable channel gain, digital

volume control, a low-jitter phase-locked loop (PLL),

a programmable high-pass filter (HPF), programmable

EQ and biquad filters, low-latency filter modes, and

allows for sample rates up to 768 kHz. The TAC5211

supports time-division multiplexing (TDM), I2S, or leftjustified

(LJ) audio formats, and can be controlled

with I2C or SPI. These integrated high-performance

features, along with a single supply operation, makes

TAC5211 an excellent choice for space-constrained

audio applications.