1 Features

• AEC Q-100 qualified:

– Device temperature grade 1: –40°C to +125°C

• Functional Safety-Capable:

– Documentation available to aid functional safety

system design

• LVCMOS output oscillator supporting frequency

range from 250kHz to 200MHz

• ±25ppm total frequency stability inclusive of all

factors and including 10 years aging

• Supply voltage supports 1.8V to 3.3V ±10%.

• Very low power consumption: 4.57mA typical and

8mA maximum for 25MHz

• Standby current 2μA typical helps for battery

powered applications

• Low jitter: < 1ps RMS jitter for Fout ≥ 10MHz

• Smallest industry wettable flank standard package:

1.60mm × 1.20mm (DLY), 2.00mm × 1.60mm

(DLR), 2.5mm × 2.00mm (DLF), 3.20mm × 2.5mm

(DLN)

• Integrated LDO for robust supply noise immunity

• Start-up time < 3ms

– Contact TI for different start-up times.

• Orderable options for slow rise and fall time for

EMI reduction

Standard frequencies (MHz): 2.048, 4, 5.12, 8, 10,

12, 12.288, 16, 19.2, 20, 23.5008, 24, 24.576, 25,

26,26.2144, 27, 28.125, 29.9925, 30, 32.768, 33. 33,

33.333, 38.4, 40, 48, 49.152, 50, 66.666, 76.8, 100,

125, 156.25, and more

• Contact TI representative for any frequency and

samples needed.

2 Applications

• Crystal oscillator replacement

• FPGA, MCU, Processor and ASIC clocking

• Automotive infotainment and cluster, Head Units,

Digital cockpit controllers, telematics

• ADAS, Automotive Camera, Sensor fusion,

automotive radar, ECU

• Automotive Gateway, Body Control Modules

3 Description

Texas Instruments' high-precision Bulk-Acoustic Wave

(BAW) micro-resonator technology is integrated

directly into a package allowing for low jitter clock

circuitry. BAW is fully designed and manufactured

at TI factories like other silicon-based fabrication

processes.

The CDC6Cx-Q1 device is a low jitter, low power,

fixed-frequency oscillator which incorporates the BAW

as the resonator source. The device is factoryprogrammed

per specific frequency and function pin.

With a frequency control logic and output frequency

divider, the CDC6Cx-Q1 is capable of producing any

frequency within the specified range providing a single

device family for all frequency needs.

The high-performance clocking, mechanical stability,

lower power consumption, flexibility, and small

package options for this device are designed for

reference clock and core clocks in automotive

applications.