1 Features

• AEC-Q100 qualified for automotive applications:

– Temperature grade 1: –40°C ≤ TA ≤ +125°C

– HBM ESD classification level 2

– CDM ESD classification level C4A

• Extended junction temperature (TJ) range:

– –40°C to +150°C

• Input voltage range:

– IN: VIN + VDO to 6.0 V

– BIAS: VOUT + VDO(BIAS) to 6.0 V

• VOUT range: 0.8 V to 3.6 V

• Low dropout: 60 mV typical at 1.5 A, VBIAS = 5 V

• Power-good (PG) output allows supply monitoring

or provides a sequencing signal for other supplies

• 2 accuracy over line, load, and temperature

• Programmable soft-start provides linear voltage

start-up

• VBIAS permits low VIN operation with good transient

response

• Stable with any output capacitor ≥ 2.2 μF

• Available in small, 3-mm × 3-mm × 1-mm

VSON-10 packages

2 Applications

• Telematic control units

• Infotainment and clusters

• Imaging radar

3 Description

The TPS748A-Q1 low-dropout (LDO) linear regulator

provides an easy-to-use robust power management

solution for a wide variety of applications. Userprogrammable

soft-start minimizes stress on the

input power source by reducing capacitive inrush

current on start-up. The soft-start is monotonic

and designed for powering many different types of

processors and application-specific integrated circuits

(ASICs). The enable input and power-good output

allow easy sequencing with external regulators.

This complete flexibility enables a solution to be

configured that meets the sequencing requirements

of field-programmable gate arrays (FPGAs), digital

signal processors (DSPs), and other applications with

special start-up requirements.

A precision reference and error amplifier deliver 2

accuracy over load, line, temperature, and process.

The device is stable with any type of capacitor greater

than or equal to 2.2 μF, and is fully specified for TJ

= –40°C to +150°C. The TPS748A-Q1 is offered in a

small, 3-mm × 3-mm, VSON-10 package, yielding a

highly compact, total solution size.