1 Features

• Low output 1/f noise < 20μVRMS (100Hz to

100kHz)

• Low output voltage ripple < 10μVRMS after ferrite

bead

• High PSRR of > 65dB (up to 100kHz)

• 1.1MHz, 700kHz, or 500kHz fixed frequency peak

current mode control

• Synchronizable with external clock (optional)

• Integrated loop compensation supports ferrite

bead for second stage L-C filter with 30dB

attenuation (optional)

• Spread spectrum modulation (optional)

• 3.0V to 17V input voltage range

• 0.6V to 5.5V output voltage range

• 25mΩ/7mΩ RDSon

• Output voltage accuracy of ±1% over temperature

• Precise enable input allows

– User-defined undervoltage lockout

– Exact sequencing

• Adjustable soft start

• Power-good output

• Output discharge (optional)

• –40°C to 150°C junction temperature range

• 2.0mm × 3.0mm QFN with 0.5mm pitch

• Create a custom design using the TPS6296x with

the WEBENCH® Power Designer

2 Applications

• Telecom infrastructure

• Test and measurement

• Aerospace and defense (radar, avionics)

• Medical

3 Description

The TPS6296x devices are a family of high-efficiency,

low noise, and low ripple current mode synchronous

buck converters. The devices are designed for noise

sensitive applications that normally use an LDO for

post regulation such as high-speed ADCs, clock

and jitter cleaner, serializer, de-serializer, and radar

applications.

To reduce the output voltage ripple, the device

loop compensation is designed to operate with an

optional second-stage ferrite bead L-C filter. Lowfrequency

noise levels, similar to a low-noise LDO,

are further achieved by filtering the internal voltage

reference with a capacitor connected to the NR/SS

pin. Combined, these features allow for an output

voltage ripple below 10μVRMS.

The device operates at a fixed switching frequency

of 1.1MHz, 700kHz, or 500kHz, and can be

synchronized to an external clock. An optional spread

spectrum modulation scheme spreads the DC/DC

switching frequency over a wider span, which lowers

the mixing spurs.