1 Features

• AEC-Q100 qualified with the following results:

– Device temperature grade 1: –40°C to +125°C

ambient operating temperature range

– Device HBM ESD classification level 2

– Device CDM ESD classification level C2b

– Enhanced connector pin ESD protection

• USB Power Delivery (PD) controller with

Programmable Power Supply (PPS) support

– Wide VIN: 5.5 V to 18 V (40-V maximum)

– Integrated buck-boost 4 power switches

supporting up to 65-W USB PD output power

– VBUS output: 3–21 V with ±20-mV step size

– IBUS output: 0–3 A with ±50-mA current limit

step size

– VBUS short circuit to VBAT and GND protection

– VBUS cable droop compensation

– MFi overcurrent protection

– Switching frequency: 300, 400, 450 kHz

– DC/DC sync in/out with dithering

• USB port configurations options

– 1 USB-PD Port (TPS25762-Q1)

– 2 USB-PD Ports (TPS25772-Q1)

• Compliant to USB

– USB Type-C® Power Delivery Rev 3.1

• TPS25762-Q1: USB–IF certification with

PPS, TID: 9509

• TPS25772-Q1: USB–IF certification with

PPS, TID: 9161

• CC logic, VCONN source and discharge

• USB cable polarity detection

– Battery charging specification rev 1.2

• DCP: Dedicated Charging Port

• Legacy Fast Charging

– 2.7-V divider-3 mode

– 1.2-V divider mode

– High Voltage DCP Protocol

• Microcontroller core allows

– Firmware updates

– Supply voltage and temperature-dependent

power management

• Short to VBUS and VBAT protection

– VBUS

– Px_ DP and Px_DM

– Px_CC1 and Px_CC2

• HotRod™ QFN package with wettable flank

2 Applications

• Automotive USB Charge

• Automotive Media Hub

• Automotive Head Unit

• Automotive Rear Seat Entertainment

3 Description

The TPS25762-Q1 is a fully integrated USB Type-

C® Power Delivery (PD) solution with integrated

Buck-Boost converter for automotive single USB

port applications. Functionality includes: integrated

Buck-Boost converter with 4 power switches; an

ARM® Cortex®-M0; USB port controller with Type-C

cable plug and orientation detection; USB Battery

Charging Specification Version 1.2 (BC1.2) detection;

USB Endpoint PHY; device power management and

supervisory circuitry; and connector pin protection

over-voltage and short-circuit protection.

An intelligent System Policy Manager maximizes

delivered USB power while protecting the system from

automotive battery transient and over-temperature

conditions.

Device configuration settings are selected through an

intuitive graphical user interface (GUI).