1 Features

• AEC-Q100 qualified with the following results

– Device temperature grade 1:

–40°C to +125°C ambient operating

temperature range

– Device HBM ESD classification level 2

– Device CDM ESD classification level C4B

• Functional Safety-Capable

– Documentation available to aid functional safety

system design

• 3.5-V to 40-V input range (45-V absolute

maximum)

• Integrated 12-V charge pump with 100-μA capacity

• Low 1.7-μA shutdown current (EN/UVLO=Low)

• Strong pullup and pulldown gate driver: 4 A

• Drives external back-to-back N-Channel MOSFETs

• Variant with integrated precharge switch driver

(TPS12111-Q1) to drive capacitive loads

• Two-level adjustable overcurrent protection

(IWRN, ISCP) with adjustable response time

(TMR) and fault flag output (FLT_I)

• Fast short-circuit protection: 1.2 μs (TPS12111-

Q1), 5 μs (TPS12110-Q1)

• Accurate analog current monitor output (IMON) –

±2 at 30 mV (Vsense)

• Adjustable undervoltage lockout (UVLO) and

overvoltage protection (OV)

• Remote overtemperature sensing (DIODE) and

protection with fault flag output (FLT_T)

• Pin-to-pin compatible with TPS4811-Q1

2 Applications

• Power distribution box

• Body control module

• DC/DC converter

3 Description

The TPS1211-Q1 family is a 45-V, smart high-side

driver with protection and diagnostics. With wide

operating voltage range of 3.5 V – 40 V, the device

is suitable for 12-V system designs.

The device has a strong 4-A sink (PD) and source

(PU) gate driver that enables power switching using

parallel FETs in high-current system designs. Use INP

as the gate driver control input.

The device has accurate current sensing (±2

at 30 mV) output (IMON) enabling systems for

energy management. The device has integrated

two-level overcurrent protection with FLT_I output

with complete adjustability of thresholds and

response time. Auto-retry and latch-off fault behavior

can be configured. The device features remote

overtemperature protection with FLT_T output.

The TPS12111-Q1 integrates a precharge driver (G)

with control input (INP_G). This features enables

designs that must drive large capacitive loads. In

shutdown mode (EN/UVLO < 0.3 V), the controller

draws IQ of 1.7 μA.

The TPS1211-Q1 is available in a 19-pin VSSOP

package.