1 Features

• 4.5V to 24V input voltage range

• 0.6V to 5.5V output voltage

• Integrated 10mΩ and 5mΩ FETs

• Support 12A continuous output current

• 270uA low quiescent current

• ± 1.0% reference voltage accuracy (25°C)

• D-CAP3™ control mode architecture control for fast

transient response optimizing 0.77V output

• Support POSCAP and all MLCC output capacitor

• Differential remote sensing

• ULQ™ extended battery life during system standby

• Built-in output discharge function

• Integrated power-good indicator

• Fixed 600kHz switching frequency

• 26A fixed OC limit

• Fixed 1.0ms soft-start time

• Large duty cycle operation

• Cycle-by-cycle overcurrent protection

• Latched output OV and UV protections

• Non-latched UVLO and OT protections

• –40°C to 125°C operating junction temperature

• 19-pin, 3.0mm × 4.0mm, HotRod™ WQFN

package

• Create a custom design using the TPS51375 with

the WEBENCH® Power Designer

2 Applications

• Notebook and PC computers

• Ultrabook, handheld tablet computers

• Industrial PC, single-board computers

• Non-military drone

• Distributed power systems

3 Description

The device is a monolithic, 12A, synchronous buck

converter with integrated MOSFETs that enable

high efficiency and offer ease-of-use with minimum

external component count for space-conscious power

systems. The TPS51375 employs D-CAP3 control

mode that provides fast transient response and

excellent line and load regulation with internal

compensation. The ULQ extended battery life feature

is extremely beneficial for long battery life in low

power operation. The large duty operation greatly

improves the load transient performance when input

voltage is low.

Other features include differential remote sensing,

Eco-mode operation for high light load efficiency,

VCC switch-over function for further optimized light

load efficiency, and body braking for load transient

improvement under low output voltage. TPS51375

supports VCCPRIM_VNNAON power rails in Intel

Meteor Lake and Arrow Lake platform.

The TPS51375 integrates a power-good indicator and

provides an output discharge function. The device

provides complete protection, including OVP, UVP,

OCP, OTP, and UVLO. The device is available in

a 19-pin, 3.0mm × 4.0mm HotRod package, and

the junction temperature is specified from –40°C to

125°C.