1 Features

Processor Cores:

• Single, dual, and quad-core Arm® Cortex®-R5F

MCU with each core running up to 400 MHz

– 16KB I-cache with 64-bit ECC per CPU core

– 16KB D-cache with 32-bit ECC per CPU core

– 256KB Tightly-Coupled Memory (TCM) with 32-

bit ECC per CPU core cluster

– Lockstep or Dual-core capable clusters

• Trigonometric Math Unit (TMU) for accelerating

trigonometric functions

– Up to 4x, one per R5F MCU core

Memory Subsystem:

• 3MB of On-Chip RAM (OCSRAM)

– 6 Banks x 512KB

– ECC error protection

– Internal DMA engine support

– Remote L2 Cache for external memory,

software programmable up to 128KB per CPU

core

System on Chip (SoC) Services and Architecture:

• 1x EDMA to support data movement functions

• Device Boot supported from the following

interfaces:

– UART (Primary/Backup)

– QSPI NOR Flash (4S/1S) (Primary)

– OSPI NOR Flash (8S 50MHz SDR Mode0, 8S

25MHz DDR XSPI) (Primary)

• Interprocessor communication modules

– SPINLOCK module for synchronizing

processes running on multiple cores

– MAILBOX functionality implemented through

CTRLMMR registers

• Central Platform Time Sync (CPTS) support with

time-sync and compare-event interrupt routers

Flash Memory Interfaces:

• 1x Flash Subsystem with OptiFlash memory

technology and eXecute In Place (XIP) support

– 1x Octal Serial Peripheral Interface (OSPI), up

to 133MHz SDR and DDR

• 1x 4-bit Multi-Media Card/Secure Digital

(MMC/SD) interface

General Connectivity:

• 6x Universal Asynchronous RX-TX (UART)

• 8x Serial Peripheral Interface (SPI) controllers

• 5x Local Interconnect Network (LIN) ports

• 4x Inter-Integrated Circuit (I2C) ports

• 8x Modular Controller Area Network (MCAN)

modules with CAN-FD support

• 4x Fast Serial Interface Transmitters (FSITX)

• 4x Fast Serial Interface Receivers (FSIRX)

• Up to 140 General-Purpose I/O (GPIO) pins

Sensing & Actuation:

• Real-time Control Subsystem (CONTROLSS)

• Flexible Input/Output Crossbars (XBAR)

• 5x 12-bit Analog-to-Digital Converters (ADC)

– 6-input SAR ADC up to 4 MSPS

• 6x Single-ended channels OR

• 3x Differential channels

– Highly Configurable ADC Digital Logic

• XBAR Start of Conversion Triggers (SOC)

• User-defined Sample and Hold (S+H)

• Flexible Post-Processing Blocks (PPB)

• 1x Resolver with up to 2x resolver to digital

converters and dedicated ADCs

– 2x 12-bit ADCs can also be used for general

purpose

• 4-input SAR ADC up to 3MSPS

– 4x Single-ended channels OR

– 2x Differential channels

• 10x Analog Comparators with Type-A

programmable DAC reference (CMPSSA)

• 10x Analog Comparators with Type-B

programmable DAC reference (CMPSSB)

• 1x 12-bit Digital-to-Analog Converter (DAC)

• 32x Pulse Width Modulation (EPWM) modules

– Single or Dual PWM channels

– Advanced PWM Configurations

– Extended HRPWM time resolution

• 16x Enhanced Capture (ECAP) modules

• 3x Enhanced Quadrature Encoder Pulse (EQEP)

modules

• 2x 4-Ch Sigma-Delta Filter Modules (SDFM)

• Additional Signal-multiplex Crossbars (XBAR)

Industrial Connectivity:

• Programmable Real-Time Unit (PRU-SS) and

PRU-Industrial Communication Subsystem (PRUICSS)

– Dual core Programmable Realtime Unit

Subsystem (PRU0 / PRU1)

• Deterministic Hardware

• Dynamic Firmware

– 20-channel enhanced input (eGPI) per PRU

– 20-channel enhanced output (eGPO) per PRU

– Embedded Peripherals and Memory

• 1x UART, 1x ECAP

• 1x MDIO, 1x IEP,

• 1x 32KB Shared General Purpose RAM

• 2x 8KB Shared Data RAM

• 1x 16KB IRAM per PRU

• ScratchPad (SPAD), MAC/CRC

– Digital encoder and sigma-delta control loops

– The PRU-ICSS enables advanced industrial

protocols including:

• EtherCAT®, Ethernet/IP™,

• PROFINET®, IO-Link® for order

– Dedicated Interrupt Controller (INTC)

– Dynamic CONTROLSS XBAR Integration

High-Speed Interfaces:

• Integrated Ethernet switch supporting up to two

external ports

– RMII (10/100) or RGMII (10/100/1000)

– IEEE 1588 (2008 Annex D, Annex E, Annex F)

with 802.1AS PTP

– Clause 45 MDIO PHY management

– 512x ALE engine-based Packet Classifiers

– Priority flow control with up to 2KB packet size

– Four CPU hardware interrupt pacing

– IP/UDP/TCP checksum offload in hardware

Security:

• Hardware Security Module (HSM) with support for

Auto SHE 1.1/EVITA

• Secure boot support

– Device Take Over Protection

– Hardware-enforced root-of-trust

– Authenticated boot

– SW Anti-rollback protection

• Debug security

– Secure device debug only after proper

authentication

– Ability to disable device debug functionality

• Device ID and Key Management

– Support for OTP Memory (FUSEROM)

• Store root keys & other security fields

– Separate EFUSE controllers and FUSE ROMs

– Unique Public Device Identifiers (UIDs)

• Memory Protection Units (MPU)

– Dedicated Arm® MPU per Cortex®-R5F core

– System MPU - present at various interfaces in

the SoC (MPU or Firewall)

– 8-16 Programmable Regions

• Enable/Privilege ID

• Start/End Address

• Read/Write/Cachable

• Secure/Non-Secure

• Cryptographic Acceleration

– Cryptographic cores with DMA Support

– AES - 128/192/256-bit key sizes

– SHA2 - 256/384/512-bit support

– DRBG with pseudo and true random number

generator

– PKA (public key accelerator) to assist in

RSA/ECC processing

Functional Safety:

• Enables design of systems with functional safety

requirements

– Error Signaling Module (ESM) with designated

SAFETY_ERRORn pin

– ECC or parity on calculation-critical memories

– Built-In Self-Test (BIST) and fault-injection for

CPU and on-chip RAM

– Runtime internal diagnostic modules including

voltage, temperature, and clock monitoring,

windowed watchdog timers, CRC engines for

memory integrity checks

• Functional Safety-Compliant targeted [Industrial]

– Developed for functional safety applications

– Documentation to be made available to aid IEC

61508 functional safety system design

– Systematic capability up to SIL-3 targeted

– Hardware integrity up to SIL-3 targeted

– Safety-related certification

• IEC 61508 planned

• Functional Safety-Compliant targeted [Automotive]

– Developed for functional safety applications

– Documentation to be made available to aid ISO

26262 functional safety system design

– Systematic capability up to ASIL-D targeted

– Hardware integrity up to ASIL-D targeted

– Safety-related certification

• ISO 26262 planned

Technology / Package:

• AEC-Q100 qualified for automotive applications

• 45-nm technology

• ZCZ Package

– AM263x Compatible (ZCZ-C)

– AM263Px Resolver (Sensor) (ZCZ-S)

– AM263Px SIP Resolver (Sensor) (ZCZ-S)

– 324-pin NFBGA

– 15.0 mm x 15.0 mm

– 0.8 mm pitch

• Pin-to-Pin compatible option with AM263x

2 Applications

• Telematics

• Single & Multi Axis Servo Drives

• AC Inverter & VF Drives

• Solar Energy

• EV Charging

• Renewable Energy Storage

• Traction Inverters

• Onboard Chargers

• DC-DC Converters

• Battery Management Systems

• Combo Box Architectures

• IO Aggregators

• Domain Controllers

3 Description

The AM263Px Sitara™ Arm® Microcontrollers are built to meet the complex real-time processing needs of

next generation industrial and automotive embedded products. The AM263Px MCU family consists of multiple

pin-to-pin compatible devices with up to four 400 MHz Arm® Cortex®-R5F cores. As an option, the Arm®

R5F subsystem can be programmed to run in lockstep or dual-core mode for a multiple functional safety

configurations. The industrial communications subsystem (PRU-ICSS) enables integrated industrial Ethernet

communication protocols such as PROFINET®, TSN, Ethernet/IP®, EtherCAT® (among many others), standard

Ethernet connectivity, and even custom I/O interfaces. The family is designed for the future of motor control and

digital power applications with advanced analog sensing and digital actuation modules.

The multiple R5F cores are arranged in cluster subsystems with 256KB of shared tightly coupled memory (TCM)

along with 3MB of shared SRAM, greatly reducing the need for external memory. Extensive ECC is included

for on-chip memories, peripherals, and interconnects for enhanced reliability. Granular firewalls managed by the

Hardware Security Manager (HSM) enable developers to implement stringent security-minded system design

requirements. Cryptographic acceleration and secure boot are also available on AM263Px devices.

TI provides a complete set of microcontroller software and development tools for the AM263Px family of

microcontrollers.