1 Features

• Vendor item drawing available, VID

V62/25633-01XE

• Radiation - Total Ionizing Dose (TID):

– TID characterized up to 50krad(Si)

– TID performance assurance up to 30krad(Si)

– Radiation Lot Acceptance Testing (RLAT) for

every wafer lot up to 30krad(Si)

• Radiation - Single-Event Effects (SEE):

– Single Event Latch-Up (SEL) immune up to

50MeV-cm2/mg at 125°C

– Single Event Transient (SET) characterized up

to LET = 50MeV-cm2/mg

• Wide operating range of 1.2V to 5.5V

• Single-supply voltage translator:

– Up translation:

• 1.2V to 1.8V

• 1.5V to 2.5V

• 1.8V to 3.3V

• 3.3V to 5.0V

– Down translation:

• 5.0V, 3.3V, 2.5V to 1.8V

• 5.0V, 3.3V to 2.5V

• 5.0V to 3.3V

• 5.5V tolerant input pins

• Supports standard pinouts

• Up to 150Mbps with 5V or 3.3V VCC

• Latch-up performance exceeds 250mA per JESD

17

• Space enhanced plastic:

– Supports defense and aerospace applications

– Controlled baseline

– Au bondwire and NiPdAu lead finish

– Meets NASA ASTM E595 outgassing

specification

– One fabrication, assembly, and test site

– Extended product life cycle

– Product traceability

2 Applications

• Enable or disable a digital signal

• Controlling an indicator LED

• Translation between communication modules and

system controllers

3 Description

The SN54SC8T9541-SEP contains eight buffers with

3-state outputs and Schmitt-Trigger inputs. The active

low output enable pins (OE1 and OE2) control all

eight channels, and are configured so that both must

be low for the outputs to be active. When the outputs

are enabled, the outputs are actively driven low or

high. When the outputs are disabled, the outputs are

set into the high-impedance state. The output level is

referenced to the supply voltage (VCC) and supports

1.8V, 2.5V, 3.3V, and 5V CMOS levels.

The input is designed with a lower threshold circuit to

support up translation for lower voltage CMOS inputs

(for example, 1.2V input to 1.8V output or 1.8V input

to 3.3V output). In addition, the 5V tolerant input pins

enable down translation (for example, 3.3V to 2.5V

output).