丝印代码：TX7316；TX7316 Three-Level, 16-Channel or Five-Level, 8-Channel Transmitter With 2.4-A Pulser, T/R Switch, and Integrated Transmit Beamformer

1 Features 1• Transmitter supports: – 16-channel 3-level or 8-channel 5-level pulser and active transmit/receive (T/R) switch – Very low power on-chip beamforming mode (5- level mode): – In receive-only mode: 17 mW – In transmit-receive mode: 598 mW – In CW mode (0.6-A mode): 1.97 W – In

丝印代码：TX7316；TX7316 Three-Level, 16-Channel or Five-Level, 8-Channel Transmitter With 2.4-A Pulser, T/R Switch, and Integrated Transmit Beamformer

1 Features 1• Transmitter supports: – 16-channel 3-level or 8-channel 5-level pulser and active transmit/receive (T/R) switch – Very low power on-chip beamforming mode (5- level mode): – In receive-only mode: 17 mW – In transmit-receive mode: 598 mW – In CW mode (0.6-A mode): 1.97 W – In

TX7316 Three-Level, 16-Channel or Five-Level, 8-Channel Transmitter With 2.4-A Pulser, T/R Switch, and Integrated Transmit Beamformer

1 Features 1• Transmitter supports: – 16-channel 3-level or 8-channel 5-level pulser and active transmit/receive (T/R) switch – Very low power on-chip beamforming mode (5- level mode): – In receive-only mode: 17 mW – In transmit-receive mode: 598 mW – In CW mode (0.6-A mode): 1.97 W – In

具有集成传输波束形成器的 16 通道三级或 8 通道五级变送器

TX7316 是一款适用于超声波成像系统的高度集成、高性能发送器解决方案。该器件共设有 16 个脉冲发生器电路 (PULS) 和 16 个发送/接收 (T/R) 开关，支持片上和片外波束形成器 (TxBF)。该器件还集成片上浮动电源，可减少所需高压电源的数量。\n\nTX7316（在本数据表中称为器件）有一个脉冲发生器电路，可生成三级高压脉冲（高达 ±100V），这些脉冲可用于激发超声波传感器的多个通道。该器件支持 8 个输出（针对五级模式）和 26 个输出（针对三级模式）。最大输出电流可配置为 2.4A 至 0.6A。 \n\n当脉冲发生器产生高压脉冲时，通过在高压发送器和低压接收器之间提供 • 发送器支持： \n• 超低功耗片上波束形成模式（五级模式）： \n• 在发送/接收模式下：598mW\n• 在全局断电模式下：4.3mW\n• 三级/五级脉冲发生器： \n• 最小输出电压：±1V\n• 最大钳位电流：1A 至 0.25A（在三级模式下）\n• 第二谐波在 5MHz 时为 –45dBc\n• CW 模式近端相位噪声：5MHz 信号（1kHz 偏移）时为 –154dBc/Hz\n• –3dB 带宽，1kΩ || 240pF 负载 \n• 36MHz（针对 4.8A 模式下的 ±100V 电源）\n• 有源发送/接收 (T/R) 开关，具有： \n• 导通电阻为 12Ω\n• ;

Three-level, 16-channel or five-level, 8-channel transmitter with 2.4-A pulser, T/R switch, and integrated transmit beamformer

文件：274.43 Kbytes Page：7 Pages

Three-level, 16-channel or five-level, 8-channel transmitter with 2.4-A pulser, T/R switch, and integrated transmit beamformer

文件：274.43 Kbytes Page：7 Pages

封装/外壳：216-LFBGA 包装：卷带（TR）剪切带（CT）Digi-Reel® 得捷定制卷带 描述：INTERFACE ANALOG FRONT END 集成电路（IC） 专用 IC

DUAL RECORDING AND PLAYBACK PRE-AMPLIFIER IC FOR SINGLE/DOUBLE CASSETTE

Description The AN7316 is a monolithic integrated circuit for radio cassette recorder and built-in only fundamental function of Rec./playback pre-amp. with ALC functionin 2-channel 16-lead DIL plastic package.

VCR VHS Chroma Signal Processor

Overview The LA7316A-N, 7316AM are VHS chroma signal processor ICs that have the following features. 1. Adjustment-free 3.58MHz VXO free-running OSC frequency, 160fH VCO free-running OSC frequency, carrier leak, PB chroma level, except REC chroma level. 2. The chip size is greatly reduced by us

VCR VHS Chroma Signal Processor

Overview The LA7316A-N, 7316AM are VHS chroma signal processor ICs that have the following features. 1. Adjustment-free 3.58MHz VXO free-running OSC frequency, 160fH VCO free-running OSC frequency, carrier leak, PB chroma level, except REC chroma level. 2. The chip size is greatly reduced by us

VCR VHS Chroma Signal Processor

Overview The LA7316A-N, 7316AM are VHS chroma signal processor ICs that have the following features. 1. Adjustment-free 3.58MHz VXO free-running OSC frequency, 160fH VCO free-running OSC frequency, carrier leak, PB chroma level, except REC chroma level. 2. The chip size is greatly reduced by us

FOUR BANDSDIGITAL CONTROLLED GRAPHIC EQUALIZER

DESCRIPTION The TDA7316 is a monolithic, digitally controlled graphic equalizer realized in BiCMOS mixed technology. The stereo signal, before any filtering, can be attenuated down to -17.625dB in 0.375dB step. All the functions can be programmed via serial bus making easy to build a µP controll