Pop-free 120mW stereo headphone amplifier

Description The TS488/9 is an enhancement of TS486/7 that eliminates pop and click noise and reduces the number of external passive components. The TS488/9 is a dual audio power amplifier capable of driving, in single-ended mode, either a 16Ω or a 32Ω stereo headset. Features ■ Pop and click n

Pop-free 120 mW stereo headphone amplifier

Features • Pop and click noise protection circuitry • Operating range from VCC = 2.2 V to 5.5 V • Standby mode active low • Output power: – 120 mW at 5 V, into 16 Ω with 0.1% THD+N max. (1 kHz) – 55 mW at 3.3 V, into 16 Ω with 0.1% THD+N max. (1 kHz) • Low current consumption: 2.7 m

弹出阻拦120mW立体声耳机放大器

Pop-free 120 mW stereo headphone amplifier

Features • Pop and click noise protection circuitry • Operating range from VCC = 2.2 V to 5.5 V • Standby mode active low • Output power: – 120 mW at 5 V, into 16 Ω with 0.1% THD+N max. (1 kHz) – 55 mW at 3.3 V, into 16 Ω with 0.1% THD+N max. (1 kHz) • Low current consumption: 2.7 m

Pop-free 120mW stereo headphone amplifier

Description The TS488/9 is an enhancement of TS486/7 that eliminates pop and click noise and reduces the number of external passive components. The TS488/9 is a dual audio power amplifier capable of driving, in single-ended mode, either a 16Ω or a 32Ω stereo headset. Features ■ Pop and click n

Pop-free 120 mW stereo headphone amplifier

Features • Pop and click noise protection circuitry • Operating range from VCC = 2.2 V to 5.5 V • Standby mode active low • Output power: – 120 mW at 5 V, into 16 Ω with 0.1% THD+N max. (1 kHz) – 55 mW at 3.3 V, into 16 Ω with 0.1% THD+N max. (1 kHz) • Low current consumption: 2.7 m

Pop-free 120mW stereo headphone amplifier

Description The TS488/9 is an enhancement of TS486/7 that eliminates pop and click noise and reduces the number of external passive components. The TS488/9 is a dual audio power amplifier capable of driving, in single-ended mode, either a 16Ω or a 32Ω stereo headset. Features ■ Pop and click n

ROUND INSTRUMENTATION HANDLES

[KEYSTONE] ROUND INSTRUMENTATION HANDLES FERRULES HANDLE MOUNTING SCREWS

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Meets EIA RS-485 and RS-422 standards 250 kbps data rate Single 5 V ± 10 supply −7 V to +12 V bus common-mode range 12 kΩ input impedance 2 kV EFT protection meets IEC1000-4-4 High EM immunity meets IEC1000-4-3 Reduced slew rate for low EM interference Short-circuit protection E

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488 and ADM489 are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both Electronics Industries Association (EIA) RS-485 and RS-422 standards. Bo

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

FEATURES Complies with ANSI TIA/EIA-485-A-1998 and ISO 8482: 1987(E) 250 kbps data rate ±4 kV HBM ESD protection on all pins Single 5 V ± 10 supply −7 V to +12 V bus common-mode range Connect up to 32 nodes on the bus Reduced slew rate for low EM interference Short-circuit protection 30 μA supp

Full-Duplex, Low Power, Slew Rate Limited, EIA RS-485 Transceivers

GENERAL DESCRIPTION The ADM488A and ADM489A are low power, differential line transceivers suitable for communication on multipoint bus transmission lines. They are intended for balanced data transmission and comply with both RS-485 and RS-422 standards of the Electronics Industries Association (E