Isolating / Safety Switching Barrier

文件：461.55 Kbytes Page：3 Pages

Filter-free stereo 2x2.8W class D audio power amplifer

Description The TS2012 is a stereo fully differential class D power amplifier. Able to drive up to 1.35W into an 8Ω load at 5V per channel. It achieves outstanding efficiency compared to typical class AB audio amps. Features ■ Operating range from VCC=2.5V to 5.5V ■ Standby mode active low ■

Filter-free stereo 2x2.8 W class D audio power amplifier

Features • Operating range from VCC = 2.5 V to 5.5 V • Standby mode active low • Output power per channel: 1.35 W @ 5 V or 0.68 W @ 3.6 V into 8 Ω with 1 % THD+N max • Output power per channel: 2.2 W @ 5 V into 4 Ω with 1 % THD+N max • Four gains can be selected: 6, 12, 18, 24 dB •

Filter-free stereo 2x2.8 W class D audio power amplifier

Features • Operating range from VCC = 2.5 V to 5.5 V • Standby mode active low • Output power per channel: 1.35 W @ 5 V or 0.68 W @ 3.6 V into 8 Ω with 1 % THD+N max • Output power per channel: 2.2 W @ 5 V into 4 Ω with 1 % THD+N max • Four gains can be selected: 6, 12, 18, 24 dB •

Filter-free stereo 2 x 2.8 W class D audio power amplifier

The TS2012EI is a fully-differential stereo class D power amplifier able to drive up to 1.15 W into an 8 Ω load at 5 V per channel. It achieves better efficiency compared to typical class AB audio amps.\nThe device has four different gain settings utilizing two digital pins: G0 and G1.\nPop and clic Operates from V\nCC = 2.5 to 5.5 V\nDedicated standby mode active low for each channel\nOutput power per channel: 1.15 W at 5 V or 0.63 W at 3.6 V into 8 Ω with 1% THD+N max.\nOutput power per channel: 1.85 W at 5 V into 4 Ω with 1% THD+N max.\nOutput short-circuit protection\nFour gain sett;

Filter-free Flip Chip stereo 2 x 2.5 W class D audio power amplifier

Description The TS2012EI is a fully-differential stereo class D power amplifier able to drive up to 1.15 W into an 8 Ω load at 5 V per channel. It achieves better efficiency compared to typical class AB audio amps. Features • Operates from VCC = 2.5 to 5.5 V • Dedicated standby mode active l

Filter-free Flip Chip stereo 2 x 2.5 W class D audio power amplifier

Description The TS2012EI is a fully-differential stereo class D power amplifier able to drive up to 1.15 W into an 8 Ω load at 5 V per channel. It achieves better efficiency compared to typical class AB audio amps. Features • Operates from VCC = 2.5 to 5.5 V • Dedicated standby mode active l

Filter-free flip-chip stereo 2x2.5 W class D audio power amplifer

Description The TS2012 is a fully differential stereo class D power amplifier able to drive up to 1.15 W into an 8 Ω load at 5 V per channel. It achieves better efficiency compared to typical class AB audio amps. Features ■ Operates from VCC= 2.5 V to 5.5 V ■ Dedicated standby mode active low

Filter-free flip-chip stereo 2x2.5 W class D audio power amplifer

Description The TS2012 is a fully differential stereo class D power amplifier able to drive up to 1.15 W into an 8 Ω load at 5 V per channel. It achieves better efficiency compared to typical class AB audio amps. Features ■ Operates from VCC= 2.5 V to 5.5 V ■ Dedicated standby mode active low

Filter-free stereo 2x2.8W class D audio power amplifer

Description The TS2012 is a stereo fully differential class D power amplifier. Able to drive up to 1.35W into an 8Ω load at 5V per channel. It achieves outstanding efficiency compared to typical class AB audio amps. Features ■ Operating range from VCC=2.5V to 5.5V ■ Standby mode active low ■

丝印代码：K012；Filter-free stereo 2x2.8 W class D audio power amplifier

Features • Operating range from VCC = 2.5 V to 5.5 V • Standby mode active low • Output power per channel: 1.35 W @ 5 V or 0.68 W @ 3.6 V into 8 Ω with 1 % THD+N max • Output power per channel: 2.2 W @ 5 V into 4 Ω with 1 % THD+N max • Four gains can be selected: 6, 12, 18, 24 dB •

FAST SWITCHIING RECTIFIER(Reverse Voltage - 50 to 1000 Volts, Current - 2.0Ampere)

FAST SWITCHING PLASTIC RECTIFIER VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes

SMT SNAP ACTION SWITCH

文件：157.5 Kbytes Page：1 Pages

行程开关

包装：散装 描述：TERM BLOCK PLUG 20POS 3.5MM 连接器，互连器件 针座、插头和插座

包装：散装 描述：TERM BLOCK PLUG 20POS 3.5MM 连接器，互连器件 针座、插头和插座

Filter-free stereo 2x2.8W class D audio power amplifer

10/100 BASE-TX VOICE OVER IP MAGNETICS MODULES

文件：192.92 Kbytes Page：1 Pages

10/100 BASE-TX VOICE OVER IP MAGNETICS MODULES

文件：322.2 Kbytes Page：1 Pages

10/100 BASE-TX VOICE OVER IP MAGNETICS MODULES

文件：195.33 Kbytes Page：1 Pages

Isolating / Safety Switching Barrier

文件：461.55 Kbytes Page：3 Pages

Operational Amplifiers

A general purpose operational amplifier that allows the user to choose the compensation capacitor best suited to his needs. With proper compensation, summing amplifier slew rates to 10 V/µs can be obtained. • Low Input Offset Current: 20 nA Maximum Over Temperature Range • External Frequency Com

Operational Amplifiers

A general purpose operational amplifier that allows the user to choose the compensation capacitor best suited to his needs. With proper compensation, summing amplifier slew rates to 10 V/µs can be obtained. • Low Input Offset Current: 20 nA Maximum Over Temperature Range • External Frequency Com

Operational Amplifiers

A general purpose operational amplifier that allows the user to choose the compensation capacitor best suited to his needs. With proper compensation, summing amplifier slew rates to 10 V/µs can be obtained. • Low Input Offset Current: 20 nA Maximum Over Temperature Range • External Frequency Com

Operational Amplifiers

文件：509.25 Kbytes Page：17 Pages

Operational Amplifiers

文件：509.25 Kbytes Page：17 Pages