双通道高侧和低侧双通道驱动IC

DSP Microcomputer

GENERAL DESCRIPTION The ADSP-2183 is a single-chip microcomputer optimized for digital signal processing (DSP) and other high speed numeric processing applications. FEATURES PERFORMANCE 19 ns Instruction Cycle Time from 26.32 MHz Crystal @ 3.3 Volts 52 MIPS Sustained Performance

HALF-BRIDGE DRIVER

Description The IR2183(4)(S) are high voltage, high speed power MOSFET and IGBT drivers with dependent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable rugge dized monolithic construction. The logic input is compatible with standard CMOS o

HALF-BRIDGE DRIVER

Description The IR2183(4)(S) are high voltage, high speed power MOSFET and IGBT drivers with dependent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable rugge dized monolithic construction. The logic input is compatible with standard CMOS o

Low Voltage Synchronous Buck PWM Control IC Final Information

General Description Micrel’s MIC2183 is a high efficiency PWM synchronous buck control IC. With its wide input voltage range of 2.9V to 14V, the MIC2183 can be used to efficiently step voltages down in 1- or 2-cell Li Ion battery powered applications, as well as in fixed 3.3V, 5V, or 12V systems.

Low Voltage Synchronous Buck PWM Control IC Final Information

General Description Micrel’s MIC2183 is a high efficiency PWM synchronous buck control IC. With its wide input voltage range of 2.9V to 14V, the MIC2183 can be used to efficiently step voltages down in 1- or 2-cell Li Ion battery powered applications, as well as in fixed 3.3V, 5V, or 12V systems.