双通道高侧和低侧双通道驱动IC

TR2183-A为双通道高侧和低侧双通道驱动IC。 • 供电范围10V~20V\n• 兼容3.3 V 、5V和 15 V电平输入逻辑\n• 两个信道的匹配传播延迟\n• 输入信号耐负压到-5V\n• 车规级半桥驱动AEC-Q100\n;

高侧和低侧双通道驱动IC

TR218X系列驱动为高侧和低侧双通道驱动IC。 • 供电范围有6.8V~20V 或10V~20V可选\n• 兼容3.3V，5V 和 15V 电平输入逻辑\n• 两个信道的匹配传播延迟\n• 输入信号耐负压到-5V\n• 不同输入控制方式可选\n• 根据不同型号可选择是否带有内置死区时间\n;

高侧和低侧双通道驱动IC

TR218x(4)S驱动为高侧和低侧双通道驱动IC。 • 供电范围有9V~20V 或12V~20V可选\n• 输入采用CMOS施密特触发器电路提高抗干扰性能 \n• 兼容3.3V，5V和 15V电平输入逻辑\n• 具有VCC和VBS欠压保护\n• 两个信道的匹配传播延迟\n• 输入信号滤波功能提高抗噪能力\n• 输入信号耐负压到-5V\n• 驱动输出电流+1.8A/-2.8A\n• 独立的信号地和电源地（仅限TR218x4）\n• 集成自举二极管BSD;

27W SWITCHING REGULATOR FOR AUTOMOTIVE APPLICATION

DESCRIPTION The GS-R218 is a switching voltage regulator that can deliver an output current of 1,5 A at 18 V when supplied by a car battery. The regulator uses a cigar lighter case with a coiled cord and it is protected against overloads and short circuits at the output (latching overload protec

Thyristors(Silicon Controlled Rectifiers)

. . . designed primarily for half-wave ac control applications, such as motor controls, heating controls and power supplies; or wherever half-wave silicon gate-controlled, solid-state devices are needed. • Glass-Passivated Junctions • Blocking Voltage to 800 Volts • TO-220 Construction —

Silicon PNP Transistor Audio Power Output

Description: The NTE218 is ideal for use as a driver, switch and medium–power amplifier applications. This device features: Features: • Low Saturation Voltage – 0.6VCE(sat) @ IC = 1A • High Gain Characteristics – hFE @ IC = 250mA: 30–100 • Excellent Safe Area Limits

TRISILTM

DESCRIPTION The SMTPBxx series has been designedto protect telecommunication equipment against lightning and transient induced by AC power lines. FEATURES BIDIRECTIONAL CROWBAR PROTECTION. BREAKDOWNVOLTAGE RANGE: From 62 V To 270 V. HOLDING CURRENT: IH= 150 mA min REPETITIVE PE

Operational Amplifiers

文件：597.13 Kbytes Page：18 Pages