Intelligent power device 60V (Low side switch)

Application Scope：Motor drivers / Solenoid drivers / Lamp drivers\nInput / Output：H/L\nNumber of Circuits：1\nProtection Functions：Overcurrent / Overtemperature / Overvoltage\nRoHS Compatible Product(s) (#)：Available\nAssembly bases：日本 Average Forward Current IO 5 A \nPower Dissipation (mounted on board) PD 1.1 W \nJunction temperature Tj 150 ℃ \nOperating Temperature (Max) Topr 125 ℃ \nOperating Temperature (Min) Topr -40 ℃ \nDrain-Source voltage VDSS 50 V ;

Low-Side Power Switch for Motor, Solenoid and Lamp Drive

文件：287.54 Kbytes Page：9 Pages

SCHOTTKY BARRIER RECTIFIERS 10 AMPERES 20 to 45 VOLTS

Switchmode Power Rectifiers . . . using the Schottky Barrier principle with a platinum barrier metal. These state–of–the–art devices have the following features: • Guardring for Stress Protection • Low Forward Voltage • 150°C Operating Junction Temperature • Guaranteed Reverse Avalanche • Ep

SWITCHMODE??Schottky Power Rectifirers

SWITCHMODE Schottky Power Rectifier The SWITCHMODE Power Rectifier employs the Schottky Barrier principle in a large area metal–to–silicon power diode. State–of–the–art geometry features epitaxial construction with oxide passivation and metal overlay contact. Ideally suited for use as rectifiers

Rectifier diodes Schottky barrier

GENERAL DESCRIPTION Schottky rectifier diodes in a plastic envelope with electrically isolated mounting tab. Intended for use as output rectifiers in low voltage, high frequency switched mode power supplies. The PBYR1045F series is supplied in the SOD100 package. The PBYR1045X series is s

Rectifier diodes Schottky barrier

GENERAL DESCRIPTION Schottky rectifier diodes in a plastic envelope with electrically isolated mounting tab. Intended for use as output rectifiers in low voltage, high frequency switched mode power supplies. The PBYR1045F series is supplied in the SOD100 package. The PBYR1045X series is s

SCHOTTKY BARRIER RECTIFIERS(10A,30-45V)

SWITCHMODE POWER RECTIFIERS D PAK SURFACE MOUNT POWER PACKAGE The D PAK Power rectifier employs the Schottky Barrier principle with a Molybdenum barrier metal. These state-of-the-art devices have the following features: * Low Forward Voltage * Low Switching noise * High Surge Capacity * Guara