HIGH SIDE POWER SWITCH FOR MOTORS SOLENOIDS AND LAMP DRIVERS

High-side Power Switch for Motors, Solenoids, and Lamp Drivers The TPD1034F is a monolithic power IC for high-side switches. The IC has a vertical MOS FET output which can be directly driven from a CMOS or TTL logic circuit (e.g., an MPU). The device offers intelligent self-protection and dia

Intelligent power device 60V (High side switch)

Application Scope：Motor drivers / Solenoid drivers / Lamp drivers\nInput / Output：H/H\nNumber of Circuits：1\nProtection Functions：Shorted load / Open load / Overtemperature\nRoHS Compatible Product(s) (#)：Available\nAssembly bases：日本 Average Forward Current IO 8 A \nPower Dissipation (mounted on board) PD 2.4 W \nJunction temperature Tj 150 ℃ \nOperating Temperature (Max) Topr 110 ℃ \nOperating Temperature (Min) Topr -40 ℃ \nPower Supply Voltage VDD 25 V \nDrain-Source voltage VDSS 60 V ;

High-side Power Switch for Motors, Solenoids, and Lamp Drivers

文件：456.9 Kbytes Page：11 Pages

High-side Power Switch for Motors, Solenoids, and Lamp Drivers

文件：456.9 Kbytes Page：11 Pages

Receiving Mixer

Description The CXG1034TN is a receiving mixer MMIC. This IC is designed using the Sony’s GaAs J-FET process. Features • Low distortion Input IP3=+1.5 dBm (Typ.) • Low LO input power operation PLO=–15 dBm • RF, LO input matching circuit • Single 3 V power supply operation • 10-pin TSSOP pac

Voltage Regulator

General Description The HT10XX series is a set of three-terminal low power voltage regulators implemented in CMOS technology. They are available with several fixed output voltages ranging from 1.5V~7.0V. The ad vantage of CMOS technology is low voltage drop out and low quiescent current. Featu

Linear Building Block . Single Operational Amplifiers in SOT Packages

General Description The TC1034/TC1035 are single CMOS operational amplifiers for low power applications. They have a typical operating supply current of 6µA, which is constant over the supply voltage range of 1.8V to 5.5V. The Op Amp has a rail-to-rail input and output which allows operation at

Linear Building Block . Single Operational Amplifiers in SOT Packages

General Description The TC1034/TC1035 are single CMOS operational amplifiers for low power applications. They have a typical operating supply current of 6µA, which is constant over the supply voltage range of 1.8V to 5.5V. The Op Amp has a rail-to-rail input and output which allows operation at

PATENTED GOLD METALIZED SILICON GATE ENHANCEMENT MODE RF POWER VDMOS TRANSISTOR

文件：31.51 Kbytes Page：2 Pages