TOSHIBA Transistor Silicon NPN / PNP Epitaxial Type (PCT Process)

Portable Equipment Applications Switching Applications • Small footprint due to small and thin package • High DC current gain : PNP hFE = 200 to 500 (IC = −0.1 A) :NPN hFE = 400 to 1000 (IC = 0.1 A) • Low collector-emitter saturation : PNP VCE (sat) = −0.

Bipolar Small-Signal Transistors

MOS GT30F126 30F126 30A/330V IGBT TO-220F Toshiba 30F126 GT30F126 Reference site : http://monitor.net.ru/forum/30f126-info-494727.html Reference PDF (30F124, 30F125, 30F127, 30F128, 30F131) : http://pdf.datasheetbank.com/pdf/Toshiba/190505.pdf

Power transistor for high-speed switching applications

Application Scope：MOS gate drivers\nPolarity：PNP + NPN\nRoHS Compatible Product(s) (#)：Available\nAssembly bases：日本 / 马来西亚 Collector Current (Q1) IC -0.8 A \nCollector Current (Q2) IC 1 A \nCollector Current (Q1) ICP -5 A \nCollector Current (Q2) ICP 5 A \nCollector power dissipation (Q1/Q2) (mounted on FR4 board (Cu 645mm**2, glass-epoxy t=1.6mm)) PC 0.83 W \nCollector-Base Voltage (Q1) VCBO -50 V \nCollector-Base;

CCD Clock Driver

Overview The LB8901M is a monolithic IC designed to drive large-capacity clock gates of a CCD image sensor (LC9900 series) at a high speed. Features • Capable of driving large-capacity gates of a CCD, etc. • On-chip eight-block driver, two of which are capable of providing drive on the three-v

CCD Clock Driver

Overview The LB8901M is a monolithic IC designed to drive large-capacity clock gates of a CCD image sensor (LC9900 series) at a high speed. Features • Capable of driving large-capacity gates of a CCD, etc. • On-chip eight-block driver, two of which are capable of providing drive on the three-v

Digital Audio Interface Receiver

Overview The LC8901 and LC8901Q are LSIs for use in IEC958, EIAJ CP-1201 format data transmission between digital audio equipment. These LSIs are used on the receiving side, and handle synchronization with the input signal and demodulation of that signal to a normal format signal. Features • On

Digital Audio Interface Receiver

Overview The LC8901 and LC8901Q are LSIs for use in IEC958, EIAJ CP-1201 format data transmission between digital audio equipment. These LSIs are used on the receiving side, and handle synchronization with the input signal and demodulation of that signal to a normal format signal. Features • On

Wideband, Ring Demodulator

DESCRIPTION The SD8901 is a ring demodulator/balanced mixer. Designed to utilize Calogic’s ultra high speed and low capacitance lateral DMOS process. The SD8901 offers significant performance improvements over JFET and diode balanced mixers when low third order harmonic distortion has been a prob