用于变速箱的恒流控制芯片

The device controls the current through inductive loads with less than 1% error. Target currents can be programmed from 0 to 1500mA with a resolution of 15 bit. The TLE92466ED supports dither currents up to 1800mA. The dither generator superimposes a triangular or trapezoidal waveform with progr • Six independent low side channels with integrated MOSFETs (RDSon = 115 mΩ)• <1% current control accuracy• Programmable setpoint from 0mA to 1.5A• Load current including dither 1.8A• Current in parallel channel mode 2.7A• Integrated dither generator with programmable amplitude, frequency and wa;

Six channel low-side solenoid driver IC

文件：5.25608 Mbytes Page：120 Pages

TLE92466ED 评估板为客户的实验室评估提供了快速拾取和放置解决方案。

评估板一个电磁阀驱动器TLE92466ED和所有必需的外部组件。评估PCB采用Arduino构成设计，包括所有Arduino兼容的微控制器板控制，例如：Infineon XMC1100 Boot Kit、Infineon XMC4700 Relax Kit、Aurix ShieldBuddy 或 Arduino Uno。请注意，不包括微控制器板。 • 六个独立的低边通道\n• 重点设定点：0mA 至 1.5A\n• 低边通道模式下的电流2.7A\n• 集成检测电阻RSHUNT = 140mΩ\n• VDD引脚电压低至3.5V时仍可工作\n• 完善的保护和诊断功能;

功能：螺线管控制器/驱动器 包装：盒 描述：EVAL BOARD FOR TLE92466 开发板，套件，编程器 评估和演示板及套件