20W BRIDGE AMPLIFIER FOR CAR RADIO

Description The TDA2005 is a class B dual audio power amplifier in Multiwatt11 package specifically designed for car radio applications. Power booster amplifiers can be easily designed using this device that provides a high current capability (up to 3.5 A) and can drive very low impedance loads

20 W bridge/stereo amplifier for car radio

Features ■ High output power: – Po = 10 + 10 W @ RL = 2 , THD = 10 % – Po = 20 W @ RL = 4 , THD = 10 %. ■ Protection against: – Output DC and AC short circuit to ground – Overrating chip temperature – Load dump voltage surge – Fortuitous open ground – Very inductive loads ■ Lo

Single BTL or dual SE output amplifier

The TDA2005 is a class B dual audio power amplifier in Multiwatt11 package specifically designed for car radio applications.\n Power booster amplifiers can be easily designed using this device that provides a high current capability (up to 3.5 A) and can drive very low impedance loads (down to • High output power:\n• Po = 10 + 10 W @ RL = 2 Ω, THD = 10 %\n• Po = 20 W @ RL = 4 Ω , THD = 10 %.\n• Protection against:\n• Output DC and AC short circuit to ground\n• Overrating chip temperature\n• Load dump voltage surge\n• Fortuitous open ground\n• Very inductive loads• Loudspeaker prot;

模拟线性

20W BRIDGE AMPLIFIER FOR CAR RADIO

文件：518.33 Kbytes Page：16 Pages

20 W bridge/stereo amplifier for car radio

Features ■ High output power: – Po = 10 + 10 W @ RL = 2 , THD = 10 % – Po = 20 W @ RL = 4 , THD = 10 %. ■ Protection against: – Output DC and AC short circuit to ground – Overrating chip temperature – Load dump voltage surge – Fortuitous open ground – Very inductive loads ■ Lo

20W BRIDGE AMPLIFIER FOR CAR RADIO

Description The TDA2005 is a class B dual audio power amplifier in Multiwatt11 package specifically designed for car radio applications. Power booster amplifiers can be easily designed using this device that provides a high current capability (up to 3.5 A) and can drive very low impedance loads

20 W bridge/stereo amplifier for car radio

Features ■ High output power: – Po = 10 + 10 W @ RL = 2 , THD = 10 % – Po = 20 W @ RL = 4 , THD = 10 %. ■ Protection against: – Output DC and AC short circuit to ground – Overrating chip temperature – Load dump voltage surge – Fortuitous open ground – Very inductive loads ■ Lo

20W BRIDGE AMPLIFIER FOR CAR RADIO

Description The TDA2005 is a class B dual audio power amplifier in Multiwatt11 package specifically designed for car radio applications. Power booster amplifiers can be easily designed using this device that provides a high current capability (up to 3.5 A) and can drive very low impedance loads

20W BRIDGE AMPLIFIER FOR CAR RADIO

文件：518.33 Kbytes Page：16 Pages

20W BRIDGE AMPLIFIER FOR CAR RADIO

文件：518.33 Kbytes Page：16 Pages

20W BRIDGE AMPLIFIER FOR CAR RADIO

文件：518.33 Kbytes Page：16 Pages

20W BRIDGE AMPLIFIER FOR CAR RADIO

文件：518.33 Kbytes Page：16 Pages

256KB and 512KB BurstRAM Secondary Cache Modules for PowerPC PReP/CHRP Platforms

The MPC2004 and MPC2005 are designed to provide burstable, high performance 256KB/512KB L2 cache for the PowerPC 60x microprocessor family in conformance with the PowerPC Reference Platform (PReP) and the PowerPC Common Hardware Reference Platform (CHRP) specifications. The modules are configured

POWER RECTIFIERS(20A,50-200V)

Switchmode Full Plastic Dual Ultrafast Power Rectifiers ... Designed for use in switching power supplies, inverters and as free wheeling diodes. These state-of-the-art devices have the following features: ✱ High Surge Capacity ✱ Low Power Loss, High Efficiency ✱ Glass Passivated chip junction

LM2005 20 Watt Automotive Power Amplifier

文件：205.68 Kbytes Page：8 Pages

LM2005 20 Watt Automotive Power Amplifier

文件：205.68 Kbytes Page：8 Pages

LM2005 20 Watt Automotive Power Amplifier

文件：205.68 Kbytes Page：8 Pages

Integrated Circuit 20W Bridge Booster for Car Radio

10 10W STEREO AMPLIFIER FOR CAR RADIO